Cart
POPULAR CATEGORY
| SERVICE | DELIVERY PRICE | DELIVERY TIME |
|---|---|---|
| Standard Delivery | £19.95 | 7 to 10 working days |
| SERVICE | DELIVERY PRICE | DELIVERY TIME |
|---|---|---|
| Standard Delivery | £19.95 | 7 to 10 working days |
| SERVICE | DELIVERY PRICE | DELIVERY TIME |
|---|---|---|
| Standard Delivery | £7.99 | 3 to 5 working days |
| SERVICE | DELIVERY PRICE | DELIVERY TIME |
|---|---|---|
| Standard Delivery | £7.99 | 5 to 7 working days |
| SERVICE | DELIVERY PRICE | DELIVERY TIME |
|---|---|---|
| Standard Delivery | £7.99 | 7 to 10 working days |
Marine and leisure electrical systems place sustained demands on batteries that standard starter units are not designed to meet. Navigation electronics, safety equipment, bilge pumps, and onboard comfort systems draw continuous current over extended periods, causing partial or deep discharge cycles that degrade conventional batteries rapidly. The Exide ET950 is engineered specifically for this application, providing 135Ah of dependable capacity within a dedicated equipment battery platform.
Manufactured by Exide Technologies under the Exide Dual Leisure range, the ET950 is built to withstand the repeated partial and deep discharge cycles inherent to vessel equipment banks. With 700A cold cranking amps (EN) and 950Wh of energy, it delivers consistent output across navigation, emergency, safety, and comfort loads without the capacity fade associated with general-purpose batteries. The ET950 operates at 12V. " The ET950 measures 513mm × 189mm – 223mm (L × W × H) and is housed in a D04 case with B00 hold-down configuration. Polarity is code 3. Weight is 39.5kg. No direct cross-reference is listed; fitment should be verified against vessel battery bay dimensions prior to ordering. Start-stop compatibility is not confirmed – refer to the product label. "This product is available in a range of capacities within the Exide Equipment series, including the EN900, EN1100, ET1300, ET1600, ER850, EU140-6, and EU165-6." The ET950 is supplied with a 2-year manufacturer warranty. "Delivery: pallet shipment, typically 3–5 working days within UK mainland. Contact PartsForMachines for delivery quote. 30-day returns.
Our Equipment battery range is designed to supply power for boats with dedicated battery banks for equipment such as navigation, emergency, safety, and comfort. The batteries are partially or even deeply discharged during use. This means that the special design of Equipment batteries, together with a good charging procedure, is the key to a reliable result and service life duration. Standard flooded with glass mat separators and plug venting • Superior cycling • Low maintenance • Slight inclination 6 • Medium vibration & tilt resistant
Key Feature:Designed for Leisure applications, balancing dependable starting with steady power delivery.
Uses:PartsForMachines is a premier e-commerce platform, founded in 2019 in Warwickshire, UK, specialising in aftermarket parts and services for construction, agriculture, and industrial machinery. We offer an extensive catalogue of over 500,000 products. Standard delivery: 1–3 working days within UK mainland. We are proud to be an authorised distributor, giving customers extra confidence when purchasing genuine products from us. In addition, we provide a 30-day return policy for eligible items.
| Brand | Exide Technologies |
|---|---|
| Voltage | 12V |
| Capacity AH (C20) | 135Ah |
| Cold Cranking Amps (EN) | 700A |
| L × W × H | 513mm × 189mm × 223mm |
| Warranty period | 2 Years |
| Weight (Kg) | 39.5 |
| Capacity AH (C5) | |
| Capacity AH (C10) | |
| Capacity AH (C100) | |
| Marine Cranking Amps (MCA) | |
| Watt-Hours (WH) | 950 |
| Length (mm) | 513 |
| Width (mm) | 189 |
| Height Inc. Terminal (mm) | 223 |
| Terminal Placement | 3 |
| Terminal Type | |
| Hold Down | B00 |
| Case Size | D04 |
| ETN Number | |
| TTNR |
| Engine Parts | Product Number | Product Name | Recommended Units | Product Price |
|---|
Expert Guidelines for Preserving Your Heavy Equipment Battery Heavy machinery, including forklifts, bulldozers, and excavators, relies on robust batteries to minimize downtime and maximize operational availability. These batteries must endure even more challenging conditions than typical automotive batteries. Moreover,...
Standard Delivery: £7.99
Delivery Estimate: 3 to 5 working days
Save Extra With 1 Offer
Compare With Similar Items
A. The ET950 operates at 12 volts and provides a rated capacity of 135Ah measured at the C20 rate. Its energy content is 950Wh, making it suitable for sustained equipment loads across extended periods at anchor or on passage.
A. The ET950 is rated at 700A cold cranking amps to the EN standard. Whilst this battery is primarily intended for equipment and leisure use rather than engine starting, this figure reflects the battery's robust construction and current delivery capability.
A. The ET950 measures 513mm in length, 189mm in width, and 223mm in height including the terminals. It weighs 39.5kg. It is housed in a D04 case with a B00 hold-down configuration. These dimensions should be verified against the available battery bay space before ordering.
A. The ET950 has a polarity code of 3. Buyers should confirm terminal orientation against their vessel's cabling layout prior to fitment. Terminal type details should be verified on the product label or by contacting PartsForMachines directly.
A. Start-stop compatibility for the ET950 has not been confirmed. Buyers should refer to the product label for guidance, or contact PartsForMachines if clarification is required before purchase.
A. Related variants within the Exide Equipment and Dual Leisure series available on PartsForMachines include the EN1100, EN900, ET1300, ET1600, ER850, EU140-6, and EU165-6. Each is designed for specific capacity requirements within marine and leisure equipment applications.
A. The ET950 is supplied with a 2-year manufacturer warranty from Exide Technologies. This covers the battery against defects under normal operating conditions as defined by the manufacturer's terms. For specific warranty claims or queries, contact PartsForMachines.
A. The ET950 is dispatched on a pallet due to its weight of 39.5kg, with delivery typically taking 3–5 working days to UK mainland addresses. Delivery charges are calculated separately – contact PartsForMachines for a delivery quote prior to ordering. A 30-day returns policy applies.
A. No direct cross-reference numbers are listed for the ET950. Fitment should be verified using the battery's physical dimensions (513mm × 189mm × 223mm), case type (D04), hold-down (B00), polarity code (3), and electrical specifications (12V, 135Ah, 700A CCA) rather than by part number substitution.
A. The Exide ET950 is designed for use as a dedicated equipment battery on boats and leisure vessels. It powers systems such as navigation electronics, safety equipment, bilge pumps, emergency lighting, and onboard comfort loads — applications that require sustained current delivery and tolerance of partial or deep discharge cycles.
By sharing your email, you agree to our privacy policy & terms of service
Question about this product? Click here
 .png)
