Cart
POPULAR CATEGORY
| SERVICE | DELIVERY PRICE | DELIVERY TIME |
|---|---|---|
| Standard Delivery | £19.95 | 7 to 10 working days |
| SERVICE | DELIVERY PRICE | DELIVERY TIME |
|---|---|---|
| Standard Delivery | £19.95 | 7 to 10 working days |
| SERVICE | DELIVERY PRICE | DELIVERY TIME |
|---|---|---|
| Standard Delivery | £5.99 | 3 to 5 working days |
| SERVICE | DELIVERY PRICE | DELIVERY TIME |
|---|---|---|
| Standard Delivery | £5.99 | 5 to 7 working days |
| SERVICE | DELIVERY PRICE | DELIVERY TIME |
|---|---|---|
| Standard Delivery | £5.99 | 7 to 10 working days |
Marine and leisure electrical systems routinely subject batteries to partial and deep discharge cycles that standard starter batteries cannot sustain. The Exide EQ1000 Equipment AGM (also referenced as Porta Power PP120) is a purpose-built 12V 120Ah dual-purpose battery engineered specifically for vessels running dedicated equipment banks covering navigation, safety, emergency, and comfort loads. Rated at 1,225 CCA (EN) and delivering 1,000Wh of usable energy, it is designed to recover reliably from the deep discharge events inherent to marine leisure use.
The EQ1000 delivering 1225A Cold Cranking Amps (EN). Manufactured by Exide Technologies under the Equipment AGM range (Product Group 2531), the EQ1000 uses absorbed glass mat construction to immobilise the electrolyte, eliminating acid stratification and significantly extending cycle life compared with conventional flooded or EFB alternatives. The sealed, maintenance-free design resists vibration and allows flexible installation orientations – a practical advantage in the confined battery compartments typical of motorboats, canal boats, and sailing vessels. The technology is also compatible with start-stop charging systems, though fitment suitability should be confirmed against the product label." The EQ1000 occupies a D07 case measuring 286mm (L) × 269mm (W) × 230mm (H inc. terminal) and weighs approximately 40kg. Polarity is standard (code 2) and hold-down type is B00. No direct cross-reference numbers are listed; buyers replacing third-party equivalents should verify dimensions and terminal configuration prior to ordering. "This battery is available in two smaller capacities within the same Equipment AGM range: EQ600 (PID000138010) and EQ800 (PID000138011), suitable where space or weight constraints require a reduced footprint.
The EQ1000 is supplied with a 2-year manufacturer warranty from Exide Technologies, covering defects in materials and workmanship under normal operating conditions.
Delivery: pallet shipment, typically 3–5 working days within UK mainland. Contact PartsForMachines for delivery quote. 30-day returns.
Our Equipment battery range is designed to supply power for boats with dedicated battery banks for equipment such as navigation, emergency, safety, and comfort. The batteries are partially or even deeply discharged during use. This means that the special design of Equipment batteries, together with a good charging procedure, is the key to a reliable result and service life duration. Absorbent Glass Mat • Superior cycling • Internal gas recombination • Absolutely maintenance free • Medium inclination • Faster recharging
Key Feature:Designed for Leisure applications, balancing dependable starting with steady power delivery.
Uses:PartsForMachines is a premier e-commerce platform, founded in 2019 in Warwickshire, UK, specialising in aftermarket parts and services for construction, agriculture, and industrial machinery. We offer an extensive catalogue of over 500,000 products. Standard delivery: 1–3 working days within UK mainland. We are proud to be an authorised distributor, giving customers extra confidence when purchasing genuine products from us. In addition, we provide a 30-day return policy for eligible items.
| Brand | Exide Technologies |
|---|---|
| Voltage | 12V |
| Capacity AH (C20) | 120Ah |
| Cold Cranking Amps (EN) | 1225A |
| L × W × H | 286mm × 269mm × 230mm |
| Warranty period | 2 Years |
| Weight (Kg) | 40 |
| Capacity AH (C5) | |
| Capacity AH (C10) | |
| Capacity AH (C100) | |
| Marine Cranking Amps (MCA) | |
| Watt-Hours (WH) | 1000 |
| Length (mm) | 286 |
| Width (mm) | 269 |
| Height Inc. Terminal (mm) | 230 |
| Terminal Placement | 2 |
| Terminal Type | |
| Hold Down | B00 |
| Case Size | D07 |
| ETN Number | |
| TTNR |
| Engine Parts | Product Number | Product Name | Recommended Units | Product Price |
|---|
Expert Guidelines for Preserving Your Heavy Equipment Battery Heavy machinery, including forklifts, bulldozers, and excavators, relies on robust batteries to minimize downtime and maximize operational availability. These batteries must endure even more challenging conditions than typical automotive batteries. Moreover,...
Standard Delivery: £5.99
Delivery Estimate: 3 to 5 working days
Save Extra With 1 Offer
Compare With Similar Items
A. The EQ1000 is designed for marine and leisure applications where a dedicated battery bank powers onboard equipment such as navigation, safety, emergency, and comfort systems. It is built to withstand the partial and deep discharge cycles typical of such use, which would degrade a standard starter battery prematurely.
A. The EQ1000 is rated at 12V with a capacity of 120Ah (C20) and delivers 1,000Wh of usable energy. Its Cold Cranking Amps (CCA, EN standard) rating is 1,225A.
A. The EQ1000 has a standard polarity configuration (polarity code 2), meaning the positive terminal is positioned on the left when the battery label faces the installer. Specific terminal post type details should be confirmed at point of order if precise compatibility is required.
A. The AGM technology used in the EQ1000 supports start-stop system compatibility in principle. However, Exide advises that suitability for a specific start-stop application should be verified against the product label before installation.
A. No IP ingress protection rating or Marine Cranking Amps (MCA) figure is published for the EQ1000. The battery is sealed and maintenance-free by virtue of its AGM construction, but it is not rated to a specific IP standard. For MCA requirements, please contact PartsForMachines before ordering.
A. No manufacturer cross-reference numbers are currently listed for the EQ1000. Customers replacing a battery from another brand should cross-check by voltage (12V), capacity (120Ah), case dimensions (286 × 269 × 230mm), and terminal polarity before purchasing.
A. Two smaller variants are available: the EQ600 (PID000138010) and the EQ800 (PID000138011). These share the same AGM technology and are suited to applications requiring lower capacity or where physical space is more restricted.
A. The EQ1000 is dispatched on a pallet due to its size and weight of approximately 40kg. Delivery to UK mainland typically takes 3–5 working days. Contact PartsForMachines directly for a delivery quote, including for addresses outside UK mainland. A 30-day returns policy applies; goods must be returned in original, unused condition.
A. The EQ1000 measures 286mm (length) × 269mm (width) × 230mm (height including terminal) and weighs approximately 40kg. It is housed in a D07 case with B00 hold-down type. Buyers should verify these dimensions against their battery compartment before ordering.
A. The EQ1000 uses Absorbed Glass Mat (AGM) technology, in which the electrolyte is immobilised within glass fibre separators. This eliminates acid stratification, improves cycle life, makes the battery fully sealed and maintenance-free, and allows installation in orientations other than strictly upright — all of which are practical benefits in marine environments subject to vibration and confined battery spaces.
By sharing your email, you agree to our privacy policy & terms of service
Question about this product? Click here
 .png)
