
Save Extra With 1 Offer
A. The EBL100 operates at a nominal voltage of 12.8V and provides a rated capacity of 100Ah, equating to 1,280Wh of total energy storage.
A. The EBL100 uses lithium iron phosphate (LiFePO4) cell chemistry, which offers superior thermal stability, a flat discharge curve, and extended cycle life compared to lead-acid, AGM, or gel battery technologies.
A. The EBL100 supports 100% depth of discharge (DoD), meaning the full 100Ah / 1,280Wh capacity is available as usable energy, unlike lead-acid batteries which are typically limited to 50% DoD.
A. The EBL100 measures 330mm in length, 175mm in width, and 195mm in height including terminals, making it a direct physical drop-in replacement for equivalent lead-acid battery sizes.
A. Terminal polarity should be confirmed directly from the label on the product prior to installation. Polarity is not pre-confirmed in the standard specification and must be verified before fitting.
A. The EBL100 is suitable for a wide range of deep cycle and auxiliary applications including leisure vehicles, marine auxiliary power, solar energy storage, mobility equipment, and off-grid power systems.
A. Start-stop vehicle compatibility has not been confirmed for the EBL100. Refer to the product label or contact Ecobat directly to verify suitability before use in a start-stop application.
A. The Ecobat EBL100 is supplied with a 5-year manufacturer warranty, covering the battery against defects under normal operating conditions.
A. Yes. The Ecobat Lithium range includes the EBL75 (75Ah), EBL90 (90Ah), and EBL100D alongside the EBL100, allowing selection of the appropriate capacity for the intended application.
A. The EBL100 is classified as a hazardous good under ADR Class 9 due to its lithium battery chemistry. Specialist hazardous goods shipping applies, with delivery typically taking 3–5 working days to UK mainland addresses. A 30-day returns policy applies.
By sharing your email, you agree to our privacy policy & terms of service