Cart
POPULAR CATEGORY
| SERVICE | DELIVERY PRICE | DELIVERY TIME |
|---|---|---|
| Standard Delivery | £19.95 | 7 to 10 working days |
| SERVICE | DELIVERY PRICE | DELIVERY TIME |
|---|---|---|
| Standard Delivery | £19.95 | 7 to 10 working days |
| SERVICE | DELIVERY PRICE | DELIVERY TIME |
|---|---|---|
| Standard Delivery | £7.99 | 3 to 5 working days |
| SERVICE | DELIVERY PRICE | DELIVERY TIME |
|---|---|---|
| Standard Delivery | £7.99 | 5 to 7 working days |
| SERVICE | DELIVERY PRICE | DELIVERY TIME |
|---|---|---|
| Standard Delivery | £7.99 | 7 to 10 working days |
Deep cycle applications demand a battery capable of sustained discharge and reliable recovery across hundreds of cycles conditions that standard starter batteries are not designed to withstand. The Rolls Battery Engineering S6-260AGM is a sealed, maintenance-free AGM 6V deep cycle battery rated at 234Ah (C20) and 260Ah (C100), engineered for commercial and industrial service where dependable energy storage is critical.
Rolls Battery Engineering applies Absorbed Glass Mat technology across its AGM-S and AGM-R product lines, suspending electrolyte within a fibrous glass mat separator. This construction eliminates free acid, prevents stratification, and enables recombination of gases internally delivering a spill-proof, position-tolerant cell with low self-discharge and strong cycle performance suited to renewable energy, floor care equipment, and materials handling applications." The S6-260AGM measures 306mm (L) 168mm (W) 227mm (H) and weighs 32kg. Terminal configuration and polarity should be verified against the product label prior to installation. No direct cross-reference codes are recorded for this unit; confirm compatibility with your application before ordering. The battery carries technology support for start-stop duty verify suitability via the product label. "This battery is available in a range of capacities within the same 6V deep cycle series: S6-220AGM, S6-245AGM, S6-275AGM, S6-370AGM, and S6-460AGM allowing system designers to select the correct capacity for their energy requirements without changing battery voltage or form factor." The S6-260AGM is supplied with a 1-year warranty covering defects in materials and workmanship under normal operating conditions. "Delivery: pallet shipment, typically 35 working days within UK mainland. Contact PartsForMachines for delivery quote. 30-day returns.
Powersports Freshpack - Reliable starting power in hot and cold weather. VARTA® Powersports batteries deliver the power you need – no matter what vehicle or terrain. The battery range provides reliable starting power, exceptional supply energy and a robust construction to withstand vibrations. With reliable starting power, VARTA® Powersports batteries are made for standard motorcycles, scooters and quad bikes. It is a dry-charged battery delivered in Freshpack version (with acid pack).
Key Feature:optimised for motorcycles and two-wheelers, ensuring consistent ignition power, rapid recharge capability, and stable energy supply for compact high-performance engines and accessory systems.
Uses:PartsForMachines is a premier e-commerce platform, founded in 2019 in Warwickshire, UK, specialising in aftermarket parts and services for construction, agriculture, and industrial machinery. We offer an extensive catalogue of over 500,000 products. Standard delivery: 1–3 working days within UK mainland. We are proud to be an authorised distributor, giving customers extra confidence when purchasing genuine products from us. In addition, we provide a 30-day return policy for eligible items.
| Brand | Rolls Battery Engineering |
|---|---|
| Voltage | 6V |
| Capacity AH (C20) | 234Ah |
| Cold Cranking Amps (EN) | |
| L × W × H | 306mm × 168mm × 227mm |
| Warranty period | 1 Year |
| Weight (Kg) | 32 |
| Capacity AH (C5) | |
| Capacity AH (C10) | |
| Capacity AH (C100) | 260Ah |
| Marine Cranking Amps (MCA) | |
| Watt-Hours (WH) | |
| Length (mm) | 306 |
| Width (mm) | 168 |
| Height Inc. Terminal (mm) | 227 |
| Terminal Placement | |
| Terminal Type | |
| Hold Down | |
| Case Size | |
| ETN Number | |
| TTNR |
| Engine Parts | Product Number | Product Name | Recommended Units | Product Price |
|---|
Expert Guidelines for Preserving Your Heavy Equipment Battery Heavy machinery, including forklifts, bulldozers, and excavators, relies on robust batteries to minimize downtime and maximize operational availability. These batteries must endure even more challenging conditions than typical automotive batteries. Moreover,...
Standard Delivery: £7.99
Delivery Estimate: 3 to 5 working days
Save Extra With 1 Offer
Compare With Similar Items
Compare with Similar products
|
|
| Technical Specification | |
|---|---|
| PRODUCT NUMBER | US125 |
| Voltage | 6 |
| Capacity (AH) | 242 |
| Terminal Type | UTL |
| Length | 260 |
| Width | 181 |
| Height | 286 |
A. The S6-260AGM is rated at 234Ah at the C20 discharge rate and 260Ah at the C100 rate. The appropriate rating to use depends on your application's discharge profile slower discharge applications, such as renewable energy storage, typically reference the C100 figure.
A. Yes. The S6-260AGM uses Absorbed Glass Mat (AGM) technology, which seals the electrolyte within a fibrous glass mat. There is no free liquid acid, so the battery requires no topping-up with distilled water and is spill-proof under normal operating conditions.
A. The battery measures 306mm in length, 168mm in width, and 227mm in height including terminals. It weighs 32kg. Ensure your battery compartment and supporting structure can accommodate these dimensions and this weight before installation.
A. Terminal configuration and polarity are not specified in the published product data for this unit. Rolls Battery Engineering advises verifying terminal type and polarity directly against the label on the physical product prior to installation to avoid connection errors.
A. The AGM technology used in this battery supports start-stop duty. However, suitability for a specific start-stop application must be confirmed by checking the product label, as fitment requirements vary by vehicle and system design.
A. The S6-260AGM is a commercial-grade deep cycle battery intended for applications requiring sustained discharge and reliable recovery over extended cycle life. Typical uses include renewable energy storage, electric floor care equipment, materials handling machinery, and other industrial or off-grid systems operating at 6V.
A. Yes. The same deep cycle series is available in five additional capacities: S6-220AGM, S6-245AGM, S6-275AGM, S6-370AGM, and S6-460AGM. All share the same 6V nominal voltage, allowing system designers to select the required capacity without altering voltage configuration.
A. No IP rating is published for the S6-260AGM. If ingress protection is a requirement for your installation environment, contact PartsForMachines or Rolls Battery Engineering directly to confirm whether this battery meets your specification.
A. The S6-260AGM is covered by a 1-year manufacturer's warranty against defects in materials and workmanship under normal operating conditions. The warranty does not cover damage arising from improper installation, overcharging, physical damage, or use outside the battery's specified parameters.
A. Due to its size and weight, the S6-260AGM is dispatched on a pallet. Delivery within UK mainland typically takes 35 working days. A delivery quote is required please contact PartsForMachines before placing your order. A 30-day returns policy applies; goods must be returned in their original condition.
By sharing your email, you agree to our privacy policy & terms of service
Question about this product? Click here
