
Save Extra With 1 Offer
A. The YBX3665 delivers 870 cold cranking amps (CCA) measured to the EN standard, making it suitable for high-compression diesel and large petrol engines in commercial and agricultural applications.
A. The rated capacity is 112Ah at the 20-hour discharge rate. The product is also marketed under the 115Ah designation – refer to the product label and your vehicle manufacturer's specification to confirm suitability.
A. The YBX3665 uses a Euro Compact Low D2A case format, a T1 terminal type, and a B1 hold-down configuration. Polarity is standard (0), meaning the positive terminal is positioned on the left when viewed from the front.
A. Start-stop compatibility has not been confirmed for this product. Refer to the markings on the product label and consult your vehicle manufacturer's requirements before installation in a start-stop application.
A. No. The YBX3665 is a sealed maintenance-free design. There is no requirement to top up electrolyte levels. Terminals should be kept clean and connections checked periodically as part of routine vehicle maintenance.
A. No cross-reference codes are listed for this SKU. To confirm a direct equivalent, consult the Yuasa fitment guide or contact your vehicle manufacturer with the original battery's specifications.
A. Standard delivery is 1–3 working days to UK mainland addresses. A 30-day returns policy applies. Shipping timescales for non-mainland UK locations may vary – contact PartsForMachines directly for further details.
A. The YBX3665 is a sealed maintenance-free (SMF) battery within the Yuasa YBX3000 range. It carries a V3 vibration resistance rating, a C2 charge retention classification, an E2 endurance rating, and a W3 water loss classification — all indicative of suitability for demanding commercial duty cycles.
A. The battery measures 346mm (length) × 173mm (width) × 234mm (height) and has a mean weight with acid of 25.5kg. Always verify tray and hold-down clearances before ordering.
A. The YBX3665 is covered by a 12-month manufacturer warranty against defects in materials and workmanship under normal use conditions. Warranty claims should be directed to PartsForMachines with proof of purchase.
By sharing your email, you agree to our privacy policy & terms of service