Cart
POPULAR CATEGORY
ADD TO CART
| SERVICE | DELIVERY PRICE | DELIVERY TIME |
|---|---|---|
| Standard Delivery | £19.95 | 7 to 10 working days |
| SERVICE | DELIVERY PRICE | DELIVERY TIME |
|---|---|---|
| Standard Delivery | £19.95 | 7 to 10 working days |
| SERVICE | DELIVERY PRICE | DELIVERY TIME |
|---|---|---|
| Standard Delivery | £7.99 | 3 to 5 working days |
| SERVICE | DELIVERY PRICE | DELIVERY TIME |
|---|---|---|
| Standard Delivery | £7.99 | 5 to 7 working days |
| SERVICE | DELIVERY PRICE | DELIVERY TIME |
|---|---|---|
| Standard Delivery | £7.99 | 7 to 10 working days |
Modern vehicles equipped with start-stop systems place significantly greater demands on the battery than conventional ignition cycles, requiring a unit capable of sustained deep cycling without loss of capacity. The Powermax PM115EFB is an Enhanced Flooded Battery engineered specifically to meet those demands, replacing OEM-fitted EFB units on a broad range of passenger cars and light commercial vehicles. Powermax batteries are built to the highest specification to cope with contemporary automotive electrical loads, combining quality construction with dependable performance across the entire service life. The EFB construction employs a polyester scrim bonded directly to each positive plate, stabilising the active material under repeated partial-state-of-charge cycling. This delivers a substantially higher cycle life than standard flooded technology and supports the frequent engine restarts that characterise urban driving. Dimensions are 315 mm – 175 mm – 190 mm (L × W × H) with a case designation of L04. The battery carries Terminal Layout 1 with standard polarity (positive right, code 0) and a B13 hold-down base, making it a direct fit replacement for all Type 115EFB applications. Rated at 12V, 80Ah (C20) and 730A CCA (EN), it cross-references to the 115EFB group. Weight is 21.8 kg. The PM115EFB is available alongside six other Powermax EFB variants – PM017EFB, PM020EFB, PM068EFB, PM096EFB, PM110EFB and PM249EFB – to cover a wide spread of vehicle fitments. Every unit is covered by a 3-year warranty against manufacturing defect. Standard delivery: 1–3 working days within UK mainland. 30-day returns.
Quality, durability and performance sum up the Powermax range of batteries. Powermax batteries are built to the very highest specification to cope with today’s automotive electrical demands. The Powermax automotive range has a battery to suit every application whilst providing premium quality and value. That’s why people trust the Powermax battery brand to give them the performance they need no matter how harsh the conditions.
Key Feature:Engineered for modern passenger vehicles, providing reliable starting power, voltage stability, and long-term durability to support daily commuting and standard automotive electrical demands.
Uses:PartsForMachines is a premier e-commerce platform, founded in 2019 in Warwickshire, UK, specialising in aftermarket parts and services for construction, agriculture, and industrial machinery. We offer an extensive catalogue of over 500,000 products. Standard delivery: 1–3 working days within UK mainland. We are proud to be an authorised distributor, giving customers extra confidence when purchasing genuine products from us. In addition, we provide a 30-day return policy for eligible items.
Fitment Warning:You must check your current battery against the specifications of this battery before ordering to ensure that this is the correct battery for your vehicle. Check battery technology, dimensions, terminal type, polarity, capacity (AH) and cranking performance (CCA). We cannot guarantee correct fitment under any circumstances.
| Brand | Powermax Battery |
|---|---|
| Voltage | 12V |
| Capacity AH (C20) | 80Ah |
| Cold Cranking Amps (EN) | 730A |
| L × W × H | 315mm × 175mm × 190mm |
| Warranty period | 3 Years |
| Weight (Kg) | 21.8 |
| Capacity AH (C5) | |
| Capacity AH (C10) | |
| Capacity AH (C100) | |
| Marine Cranking Amps (MCA) | |
| Watt-Hours (WH) | |
| Length (mm) | 315 |
| Width (mm) | 175 |
| Height Inc. Terminal (mm) | 190 |
| Terminal Placement | 0 |
| Terminal Type | 1 |
| Hold Down | B13 |
| Case Size | L04 |
| ETN Number | |
| TTNR |
| Engine Parts | Product Number | Product Name | Recommended Units | Product Price |
|---|
Expert Guidelines for Preserving Your Heavy Equipment Battery Heavy machinery, including forklifts, bulldozers, and excavators, relies on robust batteries to minimize downtime and maximize operational availability. These batteries must endure even more challenging conditions than typical automotive batteries. Moreover,...
Standard Delivery: £7.99
Delivery Estimate: 3 to 5 working days
Save Extra With 1 Offer
Compare With Similar Items
Compare with Similar products
|
Yuasa YBX7335 (T110) 12V 80Ah 780A EFB Start Stop Battery, 12 Months Warranty
£214.22
£210.02
2% OFF
|
||||
| Technical Specification | |||||
|---|---|---|---|---|---|
| PRODUCT NUMBER | YBX7335 | YBX7115 | YBX7110 | YBX7096 | YBX7031 |
| Voltage | 12 | 12 | 12 | 12 | 12 |
| Capacity (AH) | 80 | 85 | 75 | 75 | 72 |
| Hold Down | N | B3 | B3 | B3 | N |
| Cold Cranking Amps (EN1) | 780 | 760 | 730 | 700 | 720 |
| Terminal Type | T1 | T1 | T1 | T1 | T1 |
| Cell Layout | 0 | 0 | 0 | 0 | 1 |
| Length | 305 | 317 | 317 | 278 | 260 |
| Width | 173 | 175 | 175 | 175 | 173 |
| Height | 225 | 190 | 175 | 190 | 225 |
| Show More | |||||
A. Enhanced Flooded Battery (EFB) technology incorporates a polyester scrim bonded to each positive plate, which stabilises the active material during the repeated charge and discharge cycles generated by a start-stop system. Conventional flooded batteries are not designed for this cycling pattern and degrade rapidly when fitted to start-stop vehicles. The PM115EFB is purpose-built to sustain these conditions throughout its service life.
A. The PM115EFB measures 315 mm in length, 175 mm in width and 190 mm in height including the terminal. The battery weighs 21.8 kg. Always verify that the battery tray and securing arrangement in your vehicle accommodates these dimensions before ordering.
A. The PM115EFB uses Terminal Layout 1 with polarity code 0, meaning the positive terminal is positioned on the right-hand side when viewing the battery from the front with the terminals facing towards you. Confirm this matches your vehicle's cable arrangement before fitting.
A. The PM115EFB uses a B13 hold-down base, which is a ledge-type securing arrangement located at the base of the battery case. Ensure your vehicle's battery tray and clamp bracket are compatible with the B13 specification to secure the battery safely and prevent movement during vehicle operation.
A. The PM115EFB carries case designation L04. The case designation defines the external footprint and terminal positioning in accordance with BCI and EN standards. Matching the correct case designation to your vehicle ensures the battery fits the tray, the hold-down secures correctly and the terminals align with the vehicle's cables.
A. Yes. The PM115EFB cross-references directly to the 115EFB battery group. Provided the voltage (12V), capacity (80Ah), CCA (730A), dimensions (315 × 175 × 190 mm), terminal layout, polarity and hold-down type all match your vehicle's specification, the PM115EFB is a compatible replacement. If in doubt, consult your vehicle handbook or contact our technical team.
A. The PM115EFB can be fitted to vehicles without start-stop functionality; however, it is specifically engineered for start-stop applications. If your vehicle does not have a start-stop system and does not require an EFB, a standard flooded battery of the correct specification may represent a more cost-effective choice. Check your vehicle manufacturer's requirements before selecting a replacement.
A. The PM115EFB is backed by a 3-year warranty against defects in materials and workmanship under normal use conditions. Warranty claims arising from misapplication, physical damage, incorrect charging or fitment to an incompatible vehicle are not covered. Retain your proof of purchase for the duration of the warranty period.
A. The PM115EFB is dispatched via standard parcel service and is delivered within 1–3 working days to UK mainland addresses. A 30-day returns policy applies. Batteries must be returned unused and in their original condition to qualify for a return. Contact our customer services team to arrange a return or to obtain further delivery information for your specific location.
A. The PM115EFB is rated at 730A CCA to the EN standard. Cold Cranking Amps represent the current the battery can deliver at −18°C for 30 seconds while maintaining a terminal voltage of at least 7.2V. This figure indicates the battery's ability to start a cold engine reliably in low-temperature conditions.
By sharing your email, you agree to our privacy policy & terms of service
Question about this product? Click here
