
Save Extra With 1 Offer
A. The S5001 is suitable for a wide range of petrol and diesel passenger cars with conventional (non-start-stop) electrical systems. It replaces Type 063 batteries. To confirm fitment for your specific vehicle, check your existing battery type or consult your vehicle handbook.
A. No. The S5001 is a standard lead-acid battery and is not suitable for vehicles equipped with start-stop (idle stop) technology. For start-stop applications, Bosch produces dedicated AGM and EFB batteries within the S5A and S6 ranges.
A. The S5001 uses Hold-Down clamp B13 and Type 1 terminal posts. The polarity is Terminal Position 0, meaning the positive terminal is located at the front-left when viewed from the front of the battery. Ensure your vehicle's clamp and lead arrangement matches before purchase.
A. The S5001 corresponds to battery Type 063 and carries the OEM part number 552 401 052. These codes can be used to verify that this battery replaces your existing unit. If you are unsure, contact our technical team with your vehicle registration for confirmation.
A. The S5001 is backed by a 5-year manufacturer warranty. This covers defects in materials and workmanship under normal operating conditions. The warranty does not apply to damage caused by incorrect fitment, use in start-stop vehicles, or failure to maintain the battery properly.
A. The Bosch S5 range is positioned above the S4 in the Bosch passenger car battery hierarchy, offering enhanced cycle life and charge acceptance for vehicles with higher electronic demand. The S5001 is designed for dependable performance in modern cars where sustained electrical load is a factor.
A. Yes. Alongside the S5001 (52Ah), the following S5 variants are listed on PartsForMachines: S5002 (PID000138397), S5004 (PID000138398), S5005 (PID000138399), and S5006 (PID000138400). Each variant is suited to different vehicle electrical requirements and battery tray sizes.
A. The S5001 is dispatched via standard parcel service. Standard delivery takes 1–3 working days within the UK mainland. A 30-day returns policy applies. For full delivery and returns terms, please refer to the PartsForMachines terms and conditions page.
A. The S5001 measures 207mm (length) × 175mm (width) × 175mm (height including terminal). Before fitting, confirm that the battery tray, hold-down bracket, and terminal reach in your vehicle are compatible with these dimensions.
A. The Bosch S5001 is rated at 520A CCA measured to the EN standard. This rating reflects the battery's ability to start a cold engine at −18°C and is the figure used to confirm compatibility with manufacturer minimum starting requirements.
By sharing your email, you agree to our privacy policy & terms of service