Shank type is determined by your tool's chuck or hammer mechanism. SDS Max fits heavy-duty rotary hammers used in deep masonry work, including long-reach formats such as 540mm. SDS Plus suits lighter rotary hammers for general site use. Standard round-shank bits fit keyless and keyed chucks on conventional drills. Check your tool's collet or chuck specification before ordering. If the shank is correct, bit diameter then governs hole size. Sizes such as 10.2mm, 10.5mm, 11.5mm, and 12.5mm are listed individually for precision-fit applications where a standard set size does not match.
Fractional and metric sets cover the majority of everyday joinery and fabrication requirements. For tighter tolerance work, individual metric sizes see regular trade demand: 10.2mm is commonly specified for M10 bolt clearance, 10.5mm and 11.5mm suit specific fastener and anchor profiles, and 12.5mm is a preferred size for larger clearance and countersink pilots. A 22mm diameter is the workshop standard for mag drill annular cutters in steel fabrication. Ordering individual sizes rather than sets avoids replacing an entire kit when one size wears down.
Abracs drill bit sets are listed across this section in both individual-piece and multi-piece pack formats. Trade quantities are available: if the pack size or quantity shown online does not match your site requirement, contact the team directly via WhatsApp 07754288583 or at [email protected] to discuss volume options. Abracs sets typically cover metric and imperial ranges in HSS and cobalt grades, so confirm the material specification (HSS, HSS-Co, or TiN-coated) alongside pack size when enquiring.
For holesaws, the key dimensions are the arbor thread size and pilot drill diameter. Most holesaws in the 14mm to 210mm range use a standard universal arbor thread, but always verify before ordering. Carbide burrs are specified by shank diameter (typically 6mm or 8mm), overall length, and burr head profile. Match the shank diameter to your die grinder or rotary tool collet. For fitment questions on a specific product, use Ask Simon on the relevant product page for an instant fitment check.
Returns are accepted within 30 days of purchase, in original packaging, on orders delivered within the United Kingdom. For damaged-on-arrival items, report within 24 hours with photographs to [email protected] — we will typically arrange collection and replacement at no cost to you. For parts that don't fit your machine, the Fit Guarantee covers a hassle-free return at no cost. For buyer's remorse — you've changed your mind or ordered the wrong item, email us first to obtain a Return Merchandise Number; a restocking fee may apply. Refunds are issued to the original payment method once the return is inspected.
Delivery time depends on the product, your destination, and availability — the estimated time for any item appears on the product page, and 'Check where we deliver' confirms coverage for your postcode before you order. Next-day delivery is available on most products; the option appears at checkout when applicable. We deliver across the UK, Europe, the Middle East, and Africa. Use the country selector at checkout to confirm coverage and delivery options for your destination.
Power Tool Accessories
Drill bits, holesaws, carbide burrs, recip blades and screwdriver bits are the consumables and accessories that trade buyers reach for every time a job changes material or specification. This section of the Cutting Grinding Sanding Polishing range at PartsForMachines, supplied as Authorised Distributor and Seller, brings together the six Power Tool Accessories sub-categories that professional workshops and site teams order most regularly.
The Drill Bits Range covers the sizes that generate the most demand: fractional and metric sets alongside specific sizes such as 10.2mm, 10.5mm, 11.5mm, 12.5mm, and SDS Max drill bits including long-reach formats up to 540mm for deep masonry work. Holesaws & Accessories handles core cutting in wood, metal, and composite. The Carbide Burrs Range carries rotary profiles for deburring, shaping, and weld preparation.
Multi Tool Blades Range and Recip, Jig & Hacksaw Blades serve oscillating and reciprocating work across timber, metal, and mixed materials. Many blade and bit profiles are shared across tool generations, so checking the shank type and diameter is usually sufficient to confirm compatibility. Screwdriver Bits Range rounds out the section with PZ, PH, Torx, and hex formats in individual and mixed-pack options. For fitment questions, use Ask Simon on the relevant product page for an instant fitment check.
PartsForMachines lists Abracs drill bit sets alongside the broader accessory range. For trade quantities or items not immediately visible online, contact the team on WhatsApp 07754288583 or at [email protected].
Shank type is determined by your tool's chuck or hammer mechanism. SDS Max fits heavy-duty rotary hammers used in deep masonry work, including long-reach formats such as 540mm. SDS Plus suits lighter rotary hammers for general site use. Standard round-shank bits fit keyless and keyed chucks on conventional drills. Check your tool's collet or chuck specification before ordering. If the shank is correct, bit diameter then governs hole size. Sizes such as 10.2mm, 10.5mm, 11.5mm, and 12.5mm are listed individually for precision-fit applications where a standard set size does not match.
Fractional and metric sets cover the majority of everyday joinery and fabrication requirements. For tighter tolerance work, individual metric sizes see regular trade demand: 10.2mm is commonly specified for M10 bolt clearance, 10.5mm and 11.5mm suit specific fastener and anchor profiles, and 12.5mm is a preferred size for larger clearance and countersink pilots. A 22mm diameter is the workshop standard for mag drill annular cutters in steel fabrication. Ordering individual sizes rather than sets avoids replacing an entire kit when one size wears down.
Abracs drill bit sets are listed across this section in both individual-piece and multi-piece pack formats. Trade quantities are available: if the pack size or quantity shown online does not match your site requirement, contact the team directly via WhatsApp 07754288583 or at [email protected] to discuss volume options. Abracs sets typically cover metric and imperial ranges in HSS and cobalt grades, so confirm the material specification (HSS, HSS-Co, or TiN-coated) alongside pack size when enquiring.
For holesaws, the key dimensions are the arbor thread size and pilot drill diameter. Most holesaws in the 14mm to 210mm range use a standard universal arbor thread, but always verify before ordering. Carbide burrs are specified by shank diameter (typically 6mm or 8mm), overall length, and burr head profile. Match the shank diameter to your die grinder or rotary tool collet. For fitment questions on a specific product, use Ask Simon on the relevant product page for an instant fitment check.
Returns are accepted within 30 days of purchase, in original packaging, on orders delivered within the United Kingdom. For damaged-on-arrival items, report within 24 hours with photographs to [email protected] — we will typically arrange collection and replacement at no cost to you. For parts that don't fit your machine, the Fit Guarantee covers a hassle-free return at no cost. For buyer's remorse — you've changed your mind or ordered the wrong item, email us first to obtain a Return Merchandise Number; a restocking fee may apply. Refunds are issued to the original payment method once the return is inspected.
Delivery time depends on the product, your destination, and availability — the estimated time for any item appears on the product page, and 'Check where we deliver' confirms coverage for your postcode before you order. Next-day delivery is available on most products; the option appears at checkout when applicable. We deliver across the UK, Europe, the Middle East, and Africa. Use the country selector at checkout to confirm coverage and delivery options for your destination.
Get exclusive updates on offers & latest trends in construction industry
By sharing your email, you agree to our privacy policy & terms of service
Cart
POPULAR CATEGORY
