Welding consumables match on a few simple numbers, and this section is organised around them. The way in runs four routes: by consumable type across ten shelves, tips and nozzles, electrodes and wire, torches, machine spares, brushes and clamps, helmet spares, gas hoses and regulators, spot weld and dent puller parts, gas cylinders, and PPE with screens; by the size on the old consumable; by the torch or machine a part serves; or by brand, through the Sealey, SIP and Draper sections, 695 lines across the ten shelves.
The match habits are quick to learn. A contact tip bore equals the wire size it feeds. An electrode is picked by rod diameter against the thickness of the metal. A liner is chosen by the torch it runs through, and a helmet lens by the helmet model and its view size. Each shelf teaches its own rule, and each listing carries the numbers that rule needs.
Machine spares have their own shelf for the parts behind the arc: wire feed parts, torch sockets, switches and boards for named models, SDL14 and MIGHTYMIG150 among the Sealey machines, the 05 series among SIP. The model number on the machine plate typed into search finds them directly, and the drop down selector on brand specific parts lists everything compatible with a machine in one view. A fault often names its part too: a wandering, spattery arc points at the contact tip, dragging wire at the liner, and a helmet that stops darkening at its battery or lens.
Gas completes the picture: regulators matched by gas type and cylinder fitting, disposable argon and CO2 bottles with their own thread of regulator, and hoses in the oxygen blue and acetylene red convention. Anything unresolved, an older machine or an unmarked part, goes over WhatsApp on 07754288583 with the model and a photo, and Parts For Machines identifies it from there.
Cart
POPULAR CATEGORY
