Search
Search

Oops! We didn’t find any matching result

Main Menu
Phone Phone 01926754100 Cart Cart
Fit guarantee icon
FIT GUARANTEE or Hassle-Free Returns
Quick delivery icon
QUICK DELIVERY On All Products Across UK
Customer support icon
GREAT SUPPORT 24/7 Support For Any Query
rating icon
TOP RATED Trusted by Our Customers

find the right

Lifting Equipment

Start Now

Shop by Sub Category

Brands

FAQs

Match the ramp's rated capacity per pair to the vehicle's gross weight, with safety margin. For cars and light commercials up to 2,000kg, 1-2 tonne per pair is sufficient. For larger cars, light vans, and 4×4 vehicles up to 3,000kg, 2-3 tonne per pair. For commercial vans and HGV-light recovery work up to 4,500kg, 4-6 tonne per pair. Always specify capacity per pair (the rated total when both ramps are in use) — never per individual ramp. The rated capacity is listed on every ramp product page.

Low-clearance and lowered vehicles (sports cars, modified cars, vehicles with body kits) need low-profile ramps with shallow approach angles — typical 14-17 degrees vs 20+ degrees on standard ramps. Some sports-car-specific ramps have multi-section designs (a low-angle approach section followed by a steeper section) to reach a working lift height without scraping the front spoiler. Measure the vehicle's lowest front clearance before specifying — the ramp's approach-angle and underside-clearance specifications are on every product page.

Steel ramps: highest capacity, most durable for daily commercial use, heavier (typically 15-30kg per pair). The trade-workshop standard for general use. Aluminium ramps: lighter (typically 5-12kg per pair), more portable, easier to move and stow, generally lower capacity for the equivalent design. Suited to mobile-service applications where weight matters more than maximum capacity. For most workshops, steel; for mobile and home use, aluminium. The construction is listed on every product page.

Most trade-grade drive-on ramps are supplied with the rear-stop block (the welded or bolt-on stop at the top of the ramp that prevents the vehicle from rolling off the end). Wheel chocks for the wheels remaining on the ground (to prevent vehicle roll while on the ramp) are sometimes included, sometimes a separate accessory. Always use chocks on the un-ramped wheels — never rely on the handbrake alone when the vehicle is partly elevated. The included accessories are listed on every product page.

Every product is backed by our Fit Guarantee. If a part is incompatible with your machine, you can return it hassle-free. For damaged-on-arrival items, report within 24 hours with photographs to [email protected] — we will arrange collection. For other returns, email us first to obtain a Return Merchandise Number before sending. Returns are accepted within 30 days of purchase, in original packaging, on UK orders. A restocking fee may apply on returns where the buyer has changed their mind. Refunds are issued to the original payment method once the return is inspected.

Delivery time depends on the product, your destination, and availability — the estimated time for any item appears on the product page, and "Check where we deliver" confirms coverage for your postcode before you order. Next-day delivery is available on most products; the option appears at checkout when applicable. We deliver across the UK, Europe, the Middle East, and Africa. Use the country selector at checkout to confirm coverage and delivery options for your destination.

Clear

Ramps

FilterFilters
View as Grid List

Within Vehicle Lifting Equipment, Ramps covers the drive-on vehicle-service ramps used to elevate vehicles for underbody access — covering car service ramps (lightweight, individual-pair ramps for tyre-clearance under-vehicle access), commercial-vehicle service ramps (heavier-duty units for vans and light commercials), MOT-pattern ramps (sized for MOT-test-bay use), and the wider range of drive-on ramps used in workshop and home-service operations.

Parts for Machines supplies ramps across the trade and professional ranges, with rated capacities typically running from 1 tonne per pair (light car ramps) up to 6+ tonne per pair (commercial-vehicle and 4×4 ramps), in steel and aluminium constructions to suit different lift-height and capacity requirements.

We are an authorised distributor and seller of Sealey across the ramp range — covering trade-grade car ramps, low-profile sports-car ramps, commercial-vehicle ramps, and the heavier-duty 4×4 and SUV ramps used in workshop and recovery applications. SIP and Draper extend the range with workshop-grade alternatives.

Product pages list the ramp type (drive-on car ramp, low-profile sports-car ramp, commercial-vehicle ramp, MOT-pattern ramp), the rated capacity per pair (in tonnes), the ramp height (the lift achieved when the vehicle is fully on the ramp — typical 165-280mm for car ramps; higher on commercial-vehicle ramps), the approach angle (the steepness of the run-up surface — important for low-clearance vehicles), the surface material (anti-slip steel or aluminium tread), the construction (steel for highest capacity; aluminium for lower-weight portability), and the matching rear-stop block hardware. Always check the ramp's approach angle against your vehicle's underside clearance — low-clearance sports cars and lowered vehicles need low-profile ramps; commercial vehicles with rear overhang need approach-angle clearance. Drive-on ramps are LOLER-regulated for commercial workshop use — annual thorough examination is required. Trade pricing on multi-tool and workshop-kit orders is available; contact the team via WhatsApp 07754288583.

Show Only My Country Products
In this feature, you can view only your country products.
Showing 1 to 22 of 22 entries
FAQs

Match the ramp's rated capacity per pair to the vehicle's gross weight, with safety margin. For cars and light commercials up to 2,000kg, 1-2 tonne per pair is sufficient. For larger cars, light vans, and 4×4 vehicles up to 3,000kg, 2-3 tonne per pair. For commercial vans and HGV-light recovery work up to 4,500kg, 4-6 tonne per pair. Always specify capacity per pair (the rated total when both ramps are in use) — never per individual ramp. The rated capacity is listed on every ramp product page.

Low-clearance and lowered vehicles (sports cars, modified cars, vehicles with body kits) need low-profile ramps with shallow approach angles — typical 14-17 degrees vs 20+ degrees on standard ramps. Some sports-car-specific ramps have multi-section designs (a low-angle approach section followed by a steeper section) to reach a working lift height without scraping the front spoiler. Measure the vehicle's lowest front clearance before specifying — the ramp's approach-angle and underside-clearance specifications are on every product page.

Steel ramps: highest capacity, most durable for daily commercial use, heavier (typically 15-30kg per pair). The trade-workshop standard for general use. Aluminium ramps: lighter (typically 5-12kg per pair), more portable, easier to move and stow, generally lower capacity for the equivalent design. Suited to mobile-service applications where weight matters more than maximum capacity. For most workshops, steel; for mobile and home use, aluminium. The construction is listed on every product page.

Most trade-grade drive-on ramps are supplied with the rear-stop block (the welded or bolt-on stop at the top of the ramp that prevents the vehicle from rolling off the end). Wheel chocks for the wheels remaining on the ground (to prevent vehicle roll while on the ramp) are sometimes included, sometimes a separate accessory. Always use chocks on the un-ramped wheels — never rely on the handbrake alone when the vehicle is partly elevated. The included accessories are listed on every product page.

Every product is backed by our Fit Guarantee. If a part is incompatible with your machine, you can return it hassle-free. For damaged-on-arrival items, report within 24 hours with photographs to [email protected] — we will arrange collection. For other returns, email us first to obtain a Return Merchandise Number before sending. Returns are accepted within 30 days of purchase, in original packaging, on UK orders. A restocking fee may apply on returns where the buyer has changed their mind. Refunds are issued to the original payment method once the return is inspected.

Delivery time depends on the product, your destination, and availability — the estimated time for any item appears on the product page, and "Check where we deliver" confirms coverage for your postcode before you order. Next-day delivery is available on most products; the option appears at checkout when applicable. We deliver across the UK, Europe, the Middle East, and Africa. Use the country selector at checkout to confirm coverage and delivery options for your destination.

Get exclusive updates on offers & latest trends in construction industry

By sharing your email, you agree to our privacy policy & terms of service