Search
Search

Oops! We didn’t find any matching result

Main Menu
Phone Phone 01926754100 Cart Cart
Fit guarantee icon
FIT GUARANTEE or Hassle-Free Returns
Quick delivery icon
QUICK DELIVERY On All Products Across UK
Customer support icon
GREAT SUPPORT 24/7 Support For Any Query
rating icon
TOP RATED Trusted by Our Customers

Shop by Sub Category

Brands

FAQs

Pistol-grip: ergonomic for general handheld drilling work — the trigger is positioned for natural grip, the body is balanced for one-handed operation. The general-purpose standard. Best for general trade workshop and automotive work. Straight-body: inline body design with the trigger at the rear or side — gives access to restricted spaces (drilling between two close-spaced surfaces, drilling overhead in tight spaces) where a pistol-grip body wouldn't fit. Slower for general use but essential for restricted-access work. Most trade workshops keep both for different tasks.

Keyed chuck: requires a chuck-key to tighten and loosen, gives stronger grip on the drill bit (less slippage under heavy drilling load), better suited to large drill bits and steel/structural drilling. The trade workshop standard for heavy work. Keyless chuck: hand-tightened, faster bit changes, but slightly less grip on the bit (some slippage possible in heavy drilling). Better suited to general workshop use where bits change frequently. For heavy-duty drilling (10mm+ holes in steel), keyed chuck is preferred. The chuck type is on every product page.

Clockwise-only air drills: simpler internal mechanism, lower cost, suitable for general drilling. Reversible air drills: have an additional control to select reverse direction — useful for backing out broken drill bits, driving and removing taps for thread cutting, and removing fasteners. Reversible drills add a small cost premium but are essential for thread-cutting work. For general workshops doing a mix of drilling and tapping, reversible is the practical choice. The rotation direction is on every product page.

Yes. Matched drill bits (HSS general-purpose drilling, cobalt for hardened steel, masonry for concrete and brickwork, step-drills for hole-enlarging), taps and tap-handles (for thread cutting in metric and imperial sizes), chuck adapters (for non-standard bit shanks, hex-drive accessories, square-drive accessories), and matched accessory cases are available across the air-tool accessory range. WhatsApp 07754288583 for trade-pack pricing on bit and tap sets.

Every product is backed by our Fit Guarantee. If a part is incompatible with your machine, you can return it hassle-free. For damaged-on-arrival items, report within 24 hours with photographs to [email protected] — we will arrange collection. For other returns, email us first to obtain a Return Merchandise Number before sending. Returns are accepted within 30 days of purchase, in original packaging, on UK orders. A restocking fee may apply on returns where the buyer has changed their mind. Refunds are issued to the original payment method once the return is inspected.

Delivery time depends on the product, your destination, and availability — the estimated time for any item appears on the product page, and "Check where we deliver" confirms coverage for your postcode before you order. Next-day delivery is available on most products; the option appears at checkout when applicable. We deliver across the UK, Europe, the Middle East, and Africa. Use the country selector at checkout to confirm coverage and delivery options for your destination.

Clear

Air Drills

FilterFilters
View as Grid List

Within Compressors > Air Tools, Air Drills covers the pneumatic drilling tools used in metalwork, fabrication, automotive, plant-equipment service, and the wider trade and industrial workshop applications — covering pistol-grip air drills (the standard handheld pattern), straight-body air drills (for inline drilling in restricted spaces), low-speed high-torque air drills (for heavy hole-drilling in steel and structural work), and reversible-direction air drills (for tap-driving and reverse drilling).

Parts for Machines supplies air drills across the trade and industrial ranges. Air-powered drills are preferred over electric in many production-trade applications — high power-to-weight ratio, no thermal de-rating under continuous use, sealed motor immune to dust and moisture contamination, and excellent torque control via air-pressure regulation.

We are an authorised distributor and seller of SIP, Nuair, and Sealey across the air drill range. SIP covers the broadest selection — pistol-grip air drills in various capacity ranges, straight-body variants for inline use, and the matched chuck and accessory hardware. Nuair extends the range with workshop and contractor air drills. Sealey covers trade-grade air drills with specific variants for automotive and plant-equipment service.

Product pages list the chuck capacity (typical 6mm, 10mm, 13mm — the maximum drill-bit diameter the chuck can grip), the chuck type (keyless or keyed — keyed gives better grip for heavy-duty drilling; keyless is faster for changing bits), the rated free speed (typical 1,800-3,000 RPM for general air drills; lower for heavy-duty variants), the rated air consumption (in CFM at 90psi — typical 3-8 CFM), the recommended air pressure, the air inlet thread (typical 1/4″ BSP), the body type (pistol-grip or straight), the rotation direction (clockwise-only or reversible), the body weight, and the noise/vibration ratings. Trade pricing on bulk and contractor orders is available; contact the team via WhatsApp 07754288583.

Show Only My Country Products
In this feature, you can view only your country products.
Showing 1 to 9 of 9 entries
FAQs

Pistol-grip: ergonomic for general handheld drilling work — the trigger is positioned for natural grip, the body is balanced for one-handed operation. The general-purpose standard. Best for general trade workshop and automotive work. Straight-body: inline body design with the trigger at the rear or side — gives access to restricted spaces (drilling between two close-spaced surfaces, drilling overhead in tight spaces) where a pistol-grip body wouldn't fit. Slower for general use but essential for restricted-access work. Most trade workshops keep both for different tasks.

Keyed chuck: requires a chuck-key to tighten and loosen, gives stronger grip on the drill bit (less slippage under heavy drilling load), better suited to large drill bits and steel/structural drilling. The trade workshop standard for heavy work. Keyless chuck: hand-tightened, faster bit changes, but slightly less grip on the bit (some slippage possible in heavy drilling). Better suited to general workshop use where bits change frequently. For heavy-duty drilling (10mm+ holes in steel), keyed chuck is preferred. The chuck type is on every product page.

Clockwise-only air drills: simpler internal mechanism, lower cost, suitable for general drilling. Reversible air drills: have an additional control to select reverse direction — useful for backing out broken drill bits, driving and removing taps for thread cutting, and removing fasteners. Reversible drills add a small cost premium but are essential for thread-cutting work. For general workshops doing a mix of drilling and tapping, reversible is the practical choice. The rotation direction is on every product page.

Yes. Matched drill bits (HSS general-purpose drilling, cobalt for hardened steel, masonry for concrete and brickwork, step-drills for hole-enlarging), taps and tap-handles (for thread cutting in metric and imperial sizes), chuck adapters (for non-standard bit shanks, hex-drive accessories, square-drive accessories), and matched accessory cases are available across the air-tool accessory range. WhatsApp 07754288583 for trade-pack pricing on bit and tap sets.

Every product is backed by our Fit Guarantee. If a part is incompatible with your machine, you can return it hassle-free. For damaged-on-arrival items, report within 24 hours with photographs to [email protected] — we will arrange collection. For other returns, email us first to obtain a Return Merchandise Number before sending. Returns are accepted within 30 days of purchase, in original packaging, on UK orders. A restocking fee may apply on returns where the buyer has changed their mind. Refunds are issued to the original payment method once the return is inspected.

Delivery time depends on the product, your destination, and availability — the estimated time for any item appears on the product page, and "Check where we deliver" confirms coverage for your postcode before you order. Next-day delivery is available on most products; the option appears at checkout when applicable. We deliver across the UK, Europe, the Middle East, and Africa. Use the country selector at checkout to confirm coverage and delivery options for your destination.

Get exclusive updates on offers & latest trends in construction industry

By sharing your email, you agree to our privacy policy & terms of service