Search
Search

Oops! We didn’t find any matching result

Main Menu
Phone Phone 01926754100 Cart Cart
Fit guarantee icon
FIT GUARANTEE or Hassle-Free Returns
Quick delivery icon
QUICK DELIVERY On All Products Across UK
Customer support icon
GREAT SUPPORT 24/7 Support For Any Query
rating icon
TOP RATED Trusted by Our Customers

Shop by Category

FAQs

All three are needed. Diameter (M6, M8, M10, M12 — the metric bolt diameter; or imperial sizes 1/4-inch, 5/16-inch, 3/8-inch, 1/2-inch) plus thread pitch (coarse vs fine — most metric is coarse pitch by default) plus length (measured from under the bolt head to the end of the thread, in millimetres). The strength grade (8.8, 10.9, 12.9) and the head style (hex, socket cap, flange, button) complete the spec. Match all of these for direct replacement.

Grade refers to the bolt's tensile strength. Grade 8.8 has a minimum tensile strength of 800 N/mm² and yield strength of 640 N/mm² — the workshop default for general fastening. Grade 10.9 has tensile 1,000 N/mm² and yield 900 N/mm² — used for high-load joints, cylinder-head bolts, and structural connections. Grade 12.9 is higher again. Match the original bolt's grade for replacement — using a lower grade in a high-load application risks bolt failure. The grade is normally stamped on the bolt head.

Stainless covers wet, marine, and corrosive environments where plated steel would corrode — but stainless has different mechanical properties: lower-strength A2 grade is widely available and suits general-purpose use; higher-strength A4 grade matches plated grade 8.8 in tensile strength. For high-load joints (cylinder heads, flywheel bolts, suspension components), the original plated grade-8.8 (or higher) bolt should not be substituted with A2 stainless without engineering check. Match the strength grade as well as the size.

Match four things: wheel diameter and width (the wheel size — typically 50-200mm diameter on workshop trolleys), load rating per castor (the trolley's rated capacity divided by the number of castors, with 25% margin), mounting type (top-plate bolted to the equipment, threaded-stem screwed in, or socket-mount), and brake type (none, side-brake, total-brake). Wheel material (rubber for floor protection, polyurethane for harder wear, steel for high-temperature applications) is a secondary spec. The product page lists all dimensions for cross-fit selection.

Returns are accepted within 30 days of purchase, in original packaging, on orders delivered within the United Kingdom. For damaged-on-arrival items, report within 24 hours with photographs to [email protected] — we will typically arrange collection and replacement at no cost to you. For parts that don't fit your machine, the Fit Guarantee covers a hassle-free return at no cost. For buyer's remorse — you've changed your mind or ordered the wrong item, email us first to obtain a Return Merchandise Number; a restocking fee may apply. Refunds are issued to the original payment method once the return is inspected.

Delivery time depends on the product, your destination, and availability — the estimated time for any item appears on the product page, and 'Check where we deliver' confirms coverage for your postcode before you order. Next-day delivery is available on most products; the option appears at checkout when applicable. We deliver across the UK, Europe, the Middle East, and Africa. Use the country selector at checkout to confirm coverage and delivery options for your destination.

Consumables & Hardware

Consumables & Hardware covers the bulk consumable parts and hardware used in workshop assembly, repair, and maintenance work — fasteners (bolts, nuts, washers, screws, rivets), thread inserts and helicoils, castors and wheels, hose clips and clamps, terminals and connectors, adhesives and sealants, and the wider range of bulk hardware kept in workshop stores for daily replacement and repair use. Within Consumables & Hardware you will find Hardwares (the highest-volume sub-section, covering fasteners and the broader range of bulk hardware items), Castors and Wheels (workshop wheels for trolleys, jacks, and equipment), and the supporting consumables used in workshop service work. Parts For Machines supplies trade-grade consumables and hardware for vehicle workshops, fleet bays, fabrication shops, and general industrial use. The category supports day-to-day workshop activity rather than one-off project use — bulk fasteners, replacement hose clips, common castors, and the consumables that get used routinely across multiple jobs. Product pages list the dimensions (fastener thread size and length, castor diameter and load rating, hose-clip diameter range, terminal stud size and amperage rating), the material and finish (carbon steel, stainless steel, brass; zinc-plated, hot-dip galvanised, black-oxide, plain), the strength grade where applicable (8.8, 10.9, 12.9 for high-tensile bolts; A2, A4 for stainless), and the pack quantity (single, multi-pack, bulk box). For workshop fit-out, choose pack sizes to match the consumption rate — high-frequency items (M6/M8/M10 standard fasteners, common hose clips) are typically bought in bulk packs; lower-frequency items (specialist hardware) suit smaller pack sizes. Bulk hardware is normally sold in industry-standard pack quantities (50, 100, 200 per pack) with case-pack options for store-room use. Trade pricing on bulk and fleet orders is available; contact the team via WhatsApp 07754288583.

Get exclusive updates on offers & latest trends in construction industry

By sharing your email, you agree to our privacy policy & terms of service