Filters
A hose clip is picked on exactly one measurement, the outside diameter of the hose sitting over its fitting, landed comfortably inside the clip's stated clamping range, and this shelf of 378 lines runs the clamping ranges in packs throughout, because clips are fitted in numbers on real systems and real jobs, never in ones.
The worm drive families lead the shelf, the HI-GRIP zinc plated clips in stated clamping bands, 60 to 80, 70 to 90 and 80 to 100 millimetres among the many steps, sold in packs of ten, with the 26 piece assortment spanning 44 to 160 millimetres in one case for the bench that meets every size in a week. The band should catch the hose mid-range every time: a clip at the top of its travel has nothing left to tighten as the hose beds in, and one at the bottom bunches its band and grips unevenly.
The special forms serve their own joints: suction hose clamps in 50 and 75 millimetre pairs for the reinforced wire-wound hose that vacuum and pump lines run, wide band clamp sets in 8 and 12 millimetre widths that spread the grip so soft and silicone hose seals without cutting, and the flexible clamp sets, straight and 90 degree jawed, that hold a hose pinched shut during service work rather than clamping it to anything at all.
The measured diameter typed into search finds the band at once, the packs of ten stock the van for the week, and a photo of the joint with the hose measured across over WhatsApp on 07754288583 comes back with the clip band and the count for the job named together.
| Max. jaw capacity | 20mm |
|---|---|
| Open length | 345mm |
| Closed length | 140mm |
| Weight | 240g |
| Length | 155, 185 and 255mm |
|---|---|
| Capacity | 18, 34 and 67mm |
| Weight | 240g |
| Length | 55-70mm |
|---|---|
| Max. jaw capacity | 20mm |
| Length | 155mm / 165mm / 220mm |
|---|---|
| Jaw capacity | 17mm / 20mm / 31mm |
| Weight | 260g |
By sharing your email, you agree to our privacy policy & terms of service
Cart
POPULAR CATEGORY
