Search
Search

Oops! We didn’t find any matching result

Main Menu
Phone Phone 01926754100 Cart Cart
Fit guarantee icon
FIT GUARANTEE or Hassle-Free Returns
Quick delivery icon
QUICK DELIVERY On All Products Across UK
Customer support icon
GREAT SUPPORT 24/7 Support For Any Query
rating icon
TOP RATED Trusted by Our Customers

Shop by Category

FAQs

Match the charger's output and battery-type compatibility to the workshop's typical service work. For light car and motorcycle service (12V batteries up to 100Ah), 4-12 amp smart chargers handle most overnight charging. For commercial-vehicle service (24V systems, larger batteries up to 200Ah+), 12-25 amp 12V/24V switchable smart chargers. For workshop-bench fast-charging and recovery work, 50-100 amp boost-and-charge units. The output specification and battery-type compatibility are listed on every charger product page.

Modern battery testers use conductance-based measurement — a small AC test signal is applied to the battery and the conductance (electrical response) is measured. The result correlates with the battery's cold-cranking amp (CCA) capacity at the rated test temperature. Older load-testing methods drew large current from the battery and measured voltage drop — accurate but stresses the battery and can damage already-weak batteries. Conductance testing is non-destructive and fast (typically under 30 seconds). The test method is listed on every tester product page.

Three key features: (1) measurement ranges — DC voltage to 30V (or 60V for 24V systems), DC current to 10A, AC voltage to 600V, resistance and continuity, ideally diode test and capacitance; (2) safety rating — CAT III 600V minimum for any work on vehicle and mains electrical circuits; (3) accuracy — typical 0.5-1% on DC voltage for trade-grade meters. Auto-ranging is useful but not essential. The specification range is listed on every multi-meter product page.

Yes. Workshop wiring kits including: insulated-terminal assortments (ring, fork, push-on, butt-splice in the standard wire-gauge sizes), heat-shrink tubing in mixed colours and diameters, terminal crimping tools (ratcheting trade-grade crimpers cover the working range of wire gauges), and matching wire-stripping and cutting tools. For specialist work (bullet-terminal looms, fibre-optic wiring), specific kits cover the application. Search the wiring-tools category, or WhatsApp 07754288583.

Every product is backed by our Fit Guarantee. If a part is incompatible with your machine, you can return it hassle-free. For damaged-on-arrival items, report within 24 hours with photographs to [email protected] — we will arrange collection. For other returns, email us first to obtain a Return Merchandise Number before sending. Returns are accepted within 30 days of purchase, in original packaging, on UK orders. A restocking fee may apply on returns where the buyer has changed their mind. Refunds are issued to the original payment method once the return is inspected.

Delivery time depends on the product, your destination, and availability — the estimated time for any item appears on the product page, and "Check where we deliver" confirms coverage for your postcode before you order. Next-day delivery is available on most products; the option appears at checkout when applicable. We deliver across the UK, Europe, the Middle East, and Africa. Use the country selector at checkout to confirm coverage and delivery options for your destination.

Automotive Electrical Equipment

Within Electrical Repairs, Automotive Electrical Equipment covers the workshop tools and equipment used in vehicle electrical service — covering battery chargers and battery testers, alternator-and-starter test units, multi-meters and circuit testers, wiring-loom diagnostic equipment, terminal-crimping tools, electrical soldering equipment, and the wider range of automotive-electrical workshop hardware. Parts for Machines supplies automotive electrical equipment across the trade and professional ranges, covering both individual workshop tools (battery chargers, multi-meters, circuit testers) and pre-assembled electrical-service kits (terminal-crimping kits, soldering kits, wiring-tool kits). We are an authorised distributor and seller of SIP, Sealey, and Draper across the automotive electrical equipment range. Sealey and SIP cover the broadest selection — trade-grade battery chargers in the standard 6V, 12V, and 24V output combinations with smart-charge controllers, battery testers covering CCA (cold-cranking amps) and battery-state diagnosis, and the wiring-and-terminal hardware kits used in workshop loom repair. Draper extends the range with workshop and home-shop variants. Product pages list the equipment type (charger, tester, multi-meter, crimper, etc.), the rated output specification (for chargers: voltage and amperage; for testers: measurement range and accuracy; for multi-meters: voltage, current, and resistance ranges), the supply voltage (typically 230V single-phase mains for workshop equipment), the certification (IP rating where applicable; CE marking for European market), and the included accessories (test leads, charger clamps, terminal-crimping dies). For modern vehicle and plant equipment electrical service, smart battery chargers (with multi-stage charging profiles, automatic voltage selection, and battery-condition diagnosis) have replaced traditional unregulated chargers — preventing overcharge damage on AGM, Gel, and Li-ion batteries. Match the charger's compatibility to the battery types serviced. Trade pricing on multi-tool and workshop-kit orders is available; contact the team via WhatsApp 07754288583.

Get exclusive updates on offers & latest trends in construction industry

By sharing your email, you agree to our privacy policy & terms of service