Search
Search

Oops! We didn’t find any matching result

Main Menu
Phone Phone 01926754100 Cart Cart
Fit guarantee icon
FIT GUARANTEE or Hassle-Free Returns
Quick delivery icon
QUICK DELIVERY On All Products Across UK
Customer support icon
GREAT SUPPORT 24/7 Support For Any Query
rating icon
TOP RATED Trusted by Our Customers

Shop by Sub Category

Brands

FAQs

Twin-hammer mechanisms deliver torque through two opposing hammer blocks impacting the anvil — produces higher torque per blow with smoother operation and less vibration transmitted to the operator. Preferred for daily heavy-use trade and industrial tools. Single-hammer mechanisms use one hammer block — simpler, lighter, lower-cost, but with rougher operation and more vibration. Suited to lighter-duty and intermittent-use applications. The mechanism type is listed on every product page.

On most impact wrenches, the rated torque in reverse (loosening direction) is significantly higher than in forward (tightening direction) — typically 30-50% higher reverse torque. This is intentional: removing fasteners often needs more breakaway torque (overcoming corrosion, thread-locker, or seized threads) than tightening to the same final torque. The forward torque rating is the headline number; the reverse rating is normally listed separately on the product page.

Standard car wheel nuts are tightened to 100-130 N·m. A 1/2 inch impact wrench rated at 600+ N·m maximum torque, with a working setting at 130 N·m or below, is the practical choice — sufficient power for breakaway loosening, controllable forward torque for safe tightening. Always finish wheel nuts to spec with a torque wrench rather than relying on impact-wrench tightening — impact wrenches over-tighten easily, which warps brake discs and stresses studs.

Yes. Long-anvil (extended-anvil) impact wrenches reach into recessed fasteners (where the standard wrench body would foul against the surrounding component) — typical 75mm, 150mm, or longer anvils. Stubby impact wrenches have shortened body length for confined-space access (engine bays, suspension recesses). Both types are available across the standard 3/8 inch and 1/2 inch drive sizes. The anvil length and body length are listed on every product page.

Every product is backed by our Fit Guarantee. If a part is incompatible with your machine, you can return it hassle-free. For damaged-on-arrival items, report within 24 hours with photographs to [email protected] — we will arrange collection. For other returns, email us first to obtain a Return Merchandise Number before sending. Returns are accepted within 30 days of purchase, in original packaging, on UK orders. A restocking fee may apply on returns where the buyer has changed their mind. Refunds are issued to the original payment method once the return is inspected.

Delivery time depends on the product, your destination, and availability — the estimated time for any item appears on the product page, and "Check where we deliver" confirms coverage for your postcode before you order. Next-day delivery is available on most products; the option appears at checkout when applicable. We deliver across the UK, Europe, the Middle East, and Africa. Use the country selector at checkout to confirm coverage and delivery options for your destination.

Clear

Impact Drives & Wrenches

FilterFilters
View as Grid List

Within Impact Drives Wrenches & Consumables, Impact Drives & Wrenches covers the impact tool range itself — the pneumatic and battery-powered impact wrenches and drives, separate from the impact-rated sockets and accessories sub-section. The category groups together the impact tools by drive size and power source for direct selection by application.

Parts for Machines supplies impact wrenches and impact drives across the trade and professional ranges, covering pneumatic and battery-powered tools across the 3/8 inch, 1/2 inch, 3/4 inch, and 1 inch drive sizes.

We are an authorised distributor and seller of Chicago Pneumatic, Draper, and SIP across the impact wrench range. Chicago Pneumatic covers the broadest selection — pneumatic impact wrenches with twin-hammer, single-hammer, and rocking-dog mechanisms, in stub-shaft and extended-anvil variants. Draper and SIP extend the range with workshop-grade pneumatic and battery alternatives.

Product pages list the drive size, the maximum torque output (in N·m or ft-lb — typically reverse direction has higher rated torque than forward, since fastener removal needs more breakaway torque than tightening), the working torque range (typically 4-6 settings on multi-power-mode tools), the impact mechanism (twin-hammer for higher torque-to-weight; single-hammer for compact tools; rocking-dog for some specialist applications), the air consumption (for pneumatic), or the battery specification (for battery-powered), the body type, and the weight. Twin-hammer mechanisms deliver more torque per blow with smoother operation — preferred for daily heavy-use tools. Single-hammer mechanisms are simpler, lighter, and lower-cost — suited to lighter-duty and intermittent-use tools. Air consumption is the limiting factor for pneumatic impact tools — the workshop compressor must deliver the rated CFM at the operating pressure under continuous use. For high-CFM 3/4 inch and 1 inch impact wrenches, a larger workshop compressor with sufficient continuous duty rating is essential. Trade pricing on multi-tool and workshop-kit orders is available; contact the team via WhatsApp 07754288583.

Show Only My Country Products
In this feature, you can view only your country products.
Showing 1 to 5 of 5 entries
FAQs

Twin-hammer mechanisms deliver torque through two opposing hammer blocks impacting the anvil — produces higher torque per blow with smoother operation and less vibration transmitted to the operator. Preferred for daily heavy-use trade and industrial tools. Single-hammer mechanisms use one hammer block — simpler, lighter, lower-cost, but with rougher operation and more vibration. Suited to lighter-duty and intermittent-use applications. The mechanism type is listed on every product page.

On most impact wrenches, the rated torque in reverse (loosening direction) is significantly higher than in forward (tightening direction) — typically 30-50% higher reverse torque. This is intentional: removing fasteners often needs more breakaway torque (overcoming corrosion, thread-locker, or seized threads) than tightening to the same final torque. The forward torque rating is the headline number; the reverse rating is normally listed separately on the product page.

Standard car wheel nuts are tightened to 100-130 N·m. A 1/2 inch impact wrench rated at 600+ N·m maximum torque, with a working setting at 130 N·m or below, is the practical choice — sufficient power for breakaway loosening, controllable forward torque for safe tightening. Always finish wheel nuts to spec with a torque wrench rather than relying on impact-wrench tightening — impact wrenches over-tighten easily, which warps brake discs and stresses studs.

Yes. Long-anvil (extended-anvil) impact wrenches reach into recessed fasteners (where the standard wrench body would foul against the surrounding component) — typical 75mm, 150mm, or longer anvils. Stubby impact wrenches have shortened body length for confined-space access (engine bays, suspension recesses). Both types are available across the standard 3/8 inch and 1/2 inch drive sizes. The anvil length and body length are listed on every product page.

Every product is backed by our Fit Guarantee. If a part is incompatible with your machine, you can return it hassle-free. For damaged-on-arrival items, report within 24 hours with photographs to [email protected] — we will arrange collection. For other returns, email us first to obtain a Return Merchandise Number before sending. Returns are accepted within 30 days of purchase, in original packaging, on UK orders. A restocking fee may apply on returns where the buyer has changed their mind. Refunds are issued to the original payment method once the return is inspected.

Delivery time depends on the product, your destination, and availability — the estimated time for any item appears on the product page, and "Check where we deliver" confirms coverage for your postcode before you order. Next-day delivery is available on most products; the option appears at checkout when applicable. We deliver across the UK, Europe, the Middle East, and Africa. Use the country selector at checkout to confirm coverage and delivery options for your destination.

Get exclusive updates on offers & latest trends in construction industry

By sharing your email, you agree to our privacy policy & terms of service