Phone Phone 01926754100 Cart Cart
Fit guarantee icon
FIT GUARANTEE or Hassle-Free Returns
Quick delivery icon
QUICK DELIVERY On All Products Across UK
Customer support icon
GREAT SUPPORT 24/7 Support For Any Query
rating icon
TOP RATED Trusted by Our Customers

Shop by Sub Category

FAQs

Drive size against the sockets and torque against the fastener, then platform voltage since that commits you to a battery family. Bare or kit follows from whether batteries are already owned.

It follows the fastener. 80Nm on the smaller 12V bodies suits light work; 250Nm to 285Nm covers general bay work; 350Nm brushless and 400Nm mid-torque bodies handle wheel nuts and suspension fasteners.

A class between a light 3/8 inch tool and a full high-torque body. It gives enough for wheel and suspension work without the weight and bulk of the largest machines, which matters on a tool used at arm's length.

Whichever the workshop already runs. The range covers Sealey SV10.8, SV12 and SV20, Draper DXPULSE 12V and D20 20V, Chicago Pneumatic 18V and Abracs RG, and the batteries follow the platform.

A bare body is the cheaper route on a platform already in use. A kit brings batteries and a charger, which is the sensible start on a new platform or where the existing batteries are near the end of their life.

Running a fastener down in a space an impact body will not fit. At 45Nm on 3/8 inch and 1/2 inch drive it does not break fasteners loose; it turns them quickly once they are moving.

Clear

Impact Wrenches

FilterFilters
View as Grid List

Drive size and torque are read together and neither works alone. Drive fixes the sockets the wrench will take, running 3/8 inch and 1/2 inch here. Torque decides what it will move, and the range spans 80Nm on the smallest 12V bodies to 400Nm on the mid-torque 20V machines and 350Nm brushless.

Mid-torque is a class worth understanding rather than a marketing term. It sits between a light 3/8 inch tool and a full high-torque body, giving enough for wheel nuts and suspension work without the weight and bulk of the largest machines. The Draper Storm Force 20V mid-torque body at 400Nm is the example here. Sealey run brushless bodies to 350Nm and Chicago Pneumatic hold CP8849 and CP8854 at 18V in bare and kit form.

Platform voltage commits you to a battery family, so it is worth settling before the tool. The range covers Sealey SV10.8, SV12 and SV20, Draper DXPULSE 12V and D20 20V, Chicago Pneumatic 18V and Abracs RG. Bare bodies suit a workshop already on a platform; kits bring batteries and charger for a first purchase.

Cordless ratchet wrenches at 45Nm on 3/8 inch and 1/2 inch drive sit on the same leaf and do a different job, running a fastener down in a space where an impact body will not fit. Brushless motors give longer runtime for the same charge. Questions go over WhatsApp on 07754288583 with the fastener and the platform already owned. Abracs RG bodies sit on the 20V platform alongside them at the same drive sizes.

Show Only My Country Products
In this feature, you can view only your country products.
Showing 1 to 5 of 5 entries
FAQs

Drive size against the sockets and torque against the fastener, then platform voltage since that commits you to a battery family. Bare or kit follows from whether batteries are already owned.

It follows the fastener. 80Nm on the smaller 12V bodies suits light work; 250Nm to 285Nm covers general bay work; 350Nm brushless and 400Nm mid-torque bodies handle wheel nuts and suspension fasteners.

A class between a light 3/8 inch tool and a full high-torque body. It gives enough for wheel and suspension work without the weight and bulk of the largest machines, which matters on a tool used at arm's length.

Whichever the workshop already runs. The range covers Sealey SV10.8, SV12 and SV20, Draper DXPULSE 12V and D20 20V, Chicago Pneumatic 18V and Abracs RG, and the batteries follow the platform.

A bare body is the cheaper route on a platform already in use. A kit brings batteries and a charger, which is the sensible start on a new platform or where the existing batteries are near the end of their life.

Running a fastener down in a space an impact body will not fit. At 45Nm on 3/8 inch and 1/2 inch drive it does not break fasteners loose; it turns them quickly once they are moving.

Get exclusive updates on offers & latest trends in construction industry

By sharing your email, you agree to our privacy policy & terms of service