Search
Search

Oops! We didn’t find any matching result

Main Menu
Phone Phone 01926754100 Cart Cart
Fit guarantee icon
FIT GUARANTEE or Hassle-Free Returns
Quick delivery icon
QUICK DELIVERY On All Products Across UK
Customer support icon
GREAT SUPPORT 24/7 Support For Any Query
rating icon
TOP RATED Trusted by Our Customers

Shop by Sub Category

FAQs

An impact driver delivers rotational hammer blows rather than steady torque, which stops the bit camming out and drives long screws without leaning on the tool. A drill driver turns steadily and is for making holes.

Whichever the workshop is already on, since the platform commits you to a battery family. The range covers Sealey SV10.8, SV12 and SV20, Draper 10.8V, DXPULSE 12V and D20 20V, and Abracs RG 20V.

It follows the fastener. 80Nm bodies suit cabinet and trim work; brushless 20V machines at 180Nm and 200Nm drive coach screws and long structural fixings.

Cooler running and more of the battery reaching the work, which shows as longer runtime rather than as higher peak torque. Brushless bodies are held on the SV20 and D20 platforms.

A bare body suits a workshop already on the platform with batteries to hand. A kit brings batteries from 2Ah to 4Ah and a charger, which is the sensible start on a new platform.

A struck tool that converts a hammer blow into rotation, used to shock a seized screw or bolt loose. Sets at 1/2 inch drive in 8, 10 and 15 pieces sit on this leaf and do a job no powered driver does.

Clear

Impact Drivers

FilterFilters
View as Grid List

An impact driver drives fasteners rather than drilling holes. It delivers rotational hammer blows rather than steady torque, which is what stops the bit camming out and lets a long screw go home without the operator leaning on it. That is a different job from a drill driver, and the two are not substitutes.

Platform voltage comes first because it commits you to a battery family. The range covers Sealey SV10.8, SV12 and SV20, Draper Storm Force 10.8V, DXPULSE 12V and D20 20V, and Abracs RG 20V. Choosing the platform first and the tool second is what keeps a workshop on one set of batteries and chargers. Sealey run SV10.8, SV12 and SV20 across the range with Draper covering 10.8V, 12V and 20V on their own ladders.

Torque then follows the fastener. Lower voltage bodies at 80Nm suit cabinet and trim work; brushless 20V machines at 180Nm and 200Nm drive coach screws and long structural fixings. Brushless motors run cooler and give more of the battery to the work, which shows in runtime rather than in peak torque.

Bare tool or kit is a practical question about what is already owned. A bare body suits a workshop already on the platform; a kit brings batteries from 2Ah to 4Ah and a charger. Hand impact drivers at 1/2 inch drive in 8, 10 and 15 piece sets are on the same leaf for shock-loosening seized fasteners. Questions go over WhatsApp on 07754288583. Kits pairing an impact driver with a combi drill sit on the power drill leaf rather than here.

Show Only My Country Products
In this feature, you can view only your country products.
Showing 1 to 2 of 2 entries
FAQs

An impact driver delivers rotational hammer blows rather than steady torque, which stops the bit camming out and drives long screws without leaning on the tool. A drill driver turns steadily and is for making holes.

Whichever the workshop is already on, since the platform commits you to a battery family. The range covers Sealey SV10.8, SV12 and SV20, Draper 10.8V, DXPULSE 12V and D20 20V, and Abracs RG 20V.

It follows the fastener. 80Nm bodies suit cabinet and trim work; brushless 20V machines at 180Nm and 200Nm drive coach screws and long structural fixings.

Cooler running and more of the battery reaching the work, which shows as longer runtime rather than as higher peak torque. Brushless bodies are held on the SV20 and D20 platforms.

A bare body suits a workshop already on the platform with batteries to hand. A kit brings batteries from 2Ah to 4Ah and a charger, which is the sensible start on a new platform.

A struck tool that converts a hammer blow into rotation, used to shock a seized screw or bolt loose. Sets at 1/2 inch drive in 8, 10 and 15 pieces sit on this leaf and do a job no powered driver does.

Get exclusive updates on offers & latest trends in construction industry

By sharing your email, you agree to our privacy policy & terms of service