FIT GUARANTEE or Hassle-Free Returns

QUICK DELIVERY On All Products Across UK

GREAT SUPPORT 24/7 Support For Any Query

TOP RATED Trusted by Our Customers

Shop by Sub Category

Price

Stock

In Stock
Out Of Stock

Brands

Larzep

Rating

& up
& up
& up
& up

Back to Category

Hydraulic Equipment

Hydraulic Pumps

Hydraulic Cylinders

Hydraulic Floor Press

Hydraulic Hoses

FAQs

Hoses are listed at 0.8m, 1.5m, 2m, 3m, 4m, 6m and 10m. Measure the route from pump to cylinder with the cylinder at its furthest working position, then choose the next length up so the hose lies in gentle curves. Each end type is offered in only some of the lengths, so check both together.

There are three arrangements, shown in the product name and part number. Plain numbers such as AP2030 have 3/8in NPT threads at both ends. Numbers ending in G, such as AP2030G, have 3/8in NPT at one end and an AZ3120 fitting at the other. Numbers ending G2, such as AP2008G2, have AZ3120 fittings at both ends.

It is the thread size. The hoses on this page have a 6.4mm internal diameter, roughly 1/4in, and the 3/8in figure describes the NPT thread on the end fittings. Because the bore is the same across the page, you only need to choose the length, from 0.8m to 10m, and the end fittings.

No. NPT is a tapered American pipe thread with a different thread form and pitch from BSP, so a 3/8in NPT end will not seal properly in a 3/8in BSP port. Confirm the port thread on your pump and cylinder first, then choose a hose with 3/8in NPT ends or AZ3120 fittings to suit, or fit the correct adaptor.

Clear

Hydraulic Hoses

Filters

View as

This category covers hydraulic hoses for connecting hand pumps, powerpacks and cylinders in workshop hydraulic systems. All hoses listed have a 6.4mm internal diameter and come in lengths from 0.8m to 10m, including 1.5m, 2m, 3m, 4m and 6m options. End fittings vary by model: some hoses have 3/8in NPT threads at both ends, some have AZ3120 fittings at both ends, and others combine a 3/8in NPT end with an AZ3120 end.

All hoses in this section are from Larzep. To choose, measure the run between pump and cylinder and allow enough length for the equipment to be positioned without tight bends or strain on the fittings. Then match the end fittings to the ports and couplers already on your pump and cylinder, as the end configuration is shown in each product title.

Show Only My Country Products

In this feature, you can view only your country products.

Hydraulic Hose, 0.8 m, 6.4 mm Internal Diameter, 3/8

Compare

Hydraulic Hose, 0.8 m, 6.4 mm Internal Diameter, 3/8"-NPT ends, AP2008

Maximum Operating Pressure (bar)	700
Internal Diameter (mm)	6.4
Length (m)	0.8
End One Assembly	3/8"-NPT
End Two Assembly	3/8"-NPT

£94.64

Hydraulic Hose, 1.5 m, 6.4 mm Internal Diameter, 3/8

Compare

Hydraulic Hose, 1.5 m, 6.4 mm Internal Diameter, 3/8"-NPT ends, AP2015

Maximum Operating Pressure (bar)	700
Internal Diameter (mm)	6.4
Length (m)	1.5
End One Assembly	3/8"-NPT
End Two Assembly	3/8"-NPT

£117.20

Hydraulic Hose, 0.8 m, 6.4 mm Internal Diameter, AZ3120 ends, AP2008G2

Compare

Hydraulic Hose, 0.8 m, 6.4 mm Internal Diameter, AZ3120 ends, AP2008G2

Maximum Operating Pressure (bar)	700
Internal Diameter (mm)	6.4
Length (m)	0.8
End One Assembly	AZ3120
End Two Assembly	AZ3120

£142.58

Hydraulic Hose, 3.0 m, 6.4 mm Internal Diameter, 3/8

Compare

Hydraulic Hose, 3.0 m, 6.4 mm Internal Diameter, 3/8"-NPT ends, AP2030

Maximum Operating Pressure (bar)	700
Internal Diameter (mm)	6.4
Length (m)	3.0
End One Assembly	3/8"-NPT
End Two Assembly	3/8"-NPT

£169.37

Hydraulic Hose, 4.0 m, 6.4 mm Internal Diameter, 3/8

Compare

Hydraulic Hose, 4.0 m, 6.4 mm Internal Diameter, 3/8"-NPT ends, AP2040

Maximum Operating Pressure (bar)	700
Internal Diameter (mm)	6.4
Length (m)	4.0
End One Assembly	3/8"-NPT
End Two Assembly	3/8"-NPT

£206.03

Hydraulic Hose, 6.0 m, 6.4 mm Internal Diameter, AZ3120 ends, AP2060G2

Compare

Hydraulic Hose, 6.0 m, 6.4 mm Internal Diameter, AZ3120 ends, AP2060G2

Maximum Operating Pressure (bar)	700
Internal Diameter (mm)	6.4
Length (m)	6.0
End One Assembly	AZ3120
End Two Assembly	AZ3120

£325.88

Hydraulic Hose, 10.0 m, 6.4 mm Internal Diameter, 3/8

Compare

Hydraulic Hose, 10.0 m, 6.4 mm Internal Diameter, 3/8"-NPT ends, AP2100

Maximum Operating Pressure (bar)	700
Internal Diameter (mm)	6.4
Length (m)	10.0
End One Assembly	3/8"-NPT
End Two Assembly	3/8"-NPT

£431.63

Hydraulic Hose, 2.0 m, 6.4 mm Internal Diameter, 3/8

Compare

Out of Stock

Hydraulic Hose, 2.0 m, 6.4 mm Internal Diameter, 3/8"-NPT ends, AP2020

Maximum Operating Pressure (bar)	700
Internal Diameter (mm)	6.4
Length (m)	2.0
End One Assembly	3/8"-NPT
End Two Assembly	3/8"-NPT

£134.12

Pre-Book

Hydraulic Hose, 1.5 m, 6.4 mm Internal Diameter, 3/8

Compare

Out of Stock

Hydraulic Hose, 1.5 m, 6.4 mm Internal Diameter, 3/8"-NPT and AZ3120 ends, AP2015G

Maximum Operating Pressure (bar)	700
Internal Diameter (mm)	6.4
Length (m)	1.5
End One Assembly	3/8"-NPT
End Two Assembly	AZ3120

£141.17

Pre-Book

Hydraulic Hose, 10.0 m, 6.4 mm Internal Diameter, 3/8

Compare

Out of Stock

Hydraulic Hose, 10.0 m, 6.4 mm Internal Diameter, 3/8"-NPT and AZ3120 ends, AP2100G

Maximum Operating Pressure (bar)	700
Internal Diameter (mm)	6.4
Length (m)	10.0
End One Assembly	3/8"-NPT
End Two Assembly	AZ3120

£141.17

Pre-Book

Hydraulic Hose, 2.0 m, 6.4 mm Internal Diameter, 3/8

Compare

Out of Stock

Hydraulic Hose, 2.0 m, 6.4 mm Internal Diameter, 3/8"-NPT and AZ3120 ends, AP2020G

Maximum Operating Pressure (bar)	700
Internal Diameter (mm)	6.4
Length (m)	2.0
End One Assembly	3/8"-NPT
End Two Assembly	AZ3120

£158.09

Pre-Book

Hydraulic Hose, 3.0 m, 6.4 mm Internal Diameter, 3/8

Compare

Out of Stock

Hydraulic Hose, 3.0 m, 6.4 mm Internal Diameter, 3/8"-NPT and AZ3120 ends, AP2030G

Maximum Operating Pressure (bar)	700
Internal Diameter (mm)	6.4
Length (m)	3.0
End One Assembly	3/8"-NPT
End Two Assembly	AZ3120

£193.34

Pre-Book

Showing 1 to 12 of 12 entries

FAQs

Hoses are listed at 0.8m, 1.5m, 2m, 3m, 4m, 6m and 10m. Measure the route from pump to cylinder with the cylinder at its furthest working position, then choose the next length up so the hose lies in gentle curves. Each end type is offered in only some of the lengths, so check both together.

There are three arrangements, shown in the product name and part number. Plain numbers such as AP2030 have 3/8in NPT threads at both ends. Numbers ending in G, such as AP2030G, have 3/8in NPT at one end and an AZ3120 fitting at the other. Numbers ending G2, such as AP2008G2, have AZ3120 fittings at both ends.

It is the thread size. The hoses on this page have a 6.4mm internal diameter, roughly 1/4in, and the 3/8in figure describes the NPT thread on the end fittings. Because the bore is the same across the page, you only need to choose the length, from 0.8m to 10m, and the end fittings.

No. NPT is a tapered American pipe thread with a different thread form and pitch from BSP, so a 3/8in NPT end will not seal properly in a 3/8in BSP port. Confirm the port thread on your pump and cylinder first, then choose a hose with 3/8in NPT ends or AZ3120 fittings to suit, or fit the correct adaptor.