Search
Search

Oops! We didn’t find any matching result

Main Menu
Phone Phone 01926754100 Cart Cart
Fit guarantee icon
FIT GUARANTEE or Hassle-Free Returns
Quick delivery icon
QUICK DELIVERY On All Products Across UK
Customer support icon
GREAT SUPPORT 24/7 Support For Any Query
rating icon
TOP RATED Trusted by Our Customers

Shop by Sub Category

FAQs

Where the surface must not pick up carbon steel particles. Those fragments embed in the work and rust days later, staining stainless or alloy that was cleaned properly.

A crimped fill has individual wires that flex and clean without cutting deeply. A twist-knot fill twists the wires into stiff bundles that cut through scale and weld spatter.

M14, which is the common angle grinder thread. A brush with the wrong arbor cannot be fitted whatever its diameter or fill material.

A cup brush works into a corner where the fill can reach the angle. A flat wheel works along a face, covering more area but not entering an internal corner.

65mm and 75mm on the cup brushes and 115mm on the flat wheel, which matches the common grinder disc sizes those machines are built round.

Finishing a drilled hole by hand at 13mm, which removes the burr and cuts the seat for a countersunk screw without a machine.

Clear

Stainless Steel Screwdrivers

FilterFilters
View as Grid List

Stainless fill is chosen where the surface must not pick up carbon steel particles. A carbon steel brush leaves fragments embedded in the work, and on stainless or alloy those fragments rust and stain the surface days after the brushing was done. Contamination also shows up after the job rather than during it, which is what makes it costly.

Fill construction decides how aggressively the brush works. A crimped fill has individual wires that flex, which cleans without cutting deeply. A twist-knot fill twists the wires into stiff bundles, which cuts through scale and weld spatter that a crimped brush would ride over. Fill stiffness also decides how much of the surface finish the brush takes with the contamination.

The arbor is the fitment and it has to match the machine. These carry M14 arbors, which is the common angle grinder thread, and a brush with the wrong arbor cannot be fitted whatever its diameter or fill. Arbor thread is stated per brush rather than being assumed from the diameter.

Diameter runs 65mm and 75mm on the cup brushes and 115mm on the flat wheel, and the form decides the approach: a cup brush works into a corner and a flat wheel works along a face. A hand countersink at 13mm sits alongside for finishing a drilled hole. Send the surface to 07754288583 on WhatsApp. Fill material is stated alongside the construction on every brush in the range. Both cup diameters run on the same M14 thread so the size is chosen without changing machine.

Show Only My Country Products
In this feature, you can view only your country products.
Showing 1 to 30 of 54 entries
FAQs

Where the surface must not pick up carbon steel particles. Those fragments embed in the work and rust days later, staining stainless or alloy that was cleaned properly.

A crimped fill has individual wires that flex and clean without cutting deeply. A twist-knot fill twists the wires into stiff bundles that cut through scale and weld spatter.

M14, which is the common angle grinder thread. A brush with the wrong arbor cannot be fitted whatever its diameter or fill material.

A cup brush works into a corner where the fill can reach the angle. A flat wheel works along a face, covering more area but not entering an internal corner.

65mm and 75mm on the cup brushes and 115mm on the flat wheel, which matches the common grinder disc sizes those machines are built round.

Finishing a drilled hole by hand at 13mm, which removes the burr and cuts the seat for a countersunk screw without a machine.

Get exclusive updates on offers & latest trends in construction industry

By sharing your email, you agree to our privacy policy & terms of service