














Save Extra With 1 Offer
A. It is a two horsepower, fifty litre low noise oil free direct drive compressor suitable for everyday workshop and mobile applications.
A. The unit provides nine point six cubic feet per minute displacement and around four point seven cubic feet per minute free air delivery.
A. It delivers compressed air up to one hundred and sixteen pounds per square inch, about eight bar, from its fifty litre receiver.
A. The latest generation motor and pump design allow it to run at approximately sixty two decibels, quieter than many comparable workshop compressors.
A. Its oil-less direct drive pump removes the need for lubrication changes, providing cleaner air and reducing maintenance for users.
A. It is ideal for inflation tasks, nailing, stapling and airbrushing where reliable air supply and reduced noise output are required.
A. The larger tank stores more air than smaller units, helping maintain pressure for longer tool use between compressor cycles.
A. A two hundred and thirty volt, thirteen amp single phase supply is needed, matching common workshop installations.
A. A large pump combined with a modern motor encourages good airflow and cooling, enhancing reliability at lower operating noise.
A. The fifty litre receiver provides more stored air, useful for longer duty cycles or running tools that require sustained air flow.
A. Its design, including handle and wheels, makes it convenient to move around the work area despite its larger receiver.
A. The SIP 05479 operates at 62dB, making it suitable for use in small work areas, home workshops and other environments where low noise operation is important.
A. The compressor runs on a standard 230V (13A) single-phase mains supply. A 1.3-metre fitted mains cable with a 230V/13A plug is included in the box.
A. The SIP 05479 has a motor power of 2hp (1.5kW), a 50-litre receiver, a piston displacement of 9.6CFM (272ltr/min), a Free Air Delivery (FAD) of 4.7CFM (131ltr/min), and a maximum air pressure of 116psi (8 bar).
A. It is ideal for inflation tasks, nailing, stapling and airbrushing. The compressor is also suited to small-sized work areas and mobile applications.
A. The compressor uses an oil-free pump, which removes the need for routine oil checks and changes associated with oil-lubricated units, reducing ongoing maintenance requirements.
A. Yes. The unit features a wheel-mounted design with two solid wheels, front rubber feet, and an angled pull handle, allowing it to be moved freely across a variety of work area settings.
A. The package contains one SIP DD 2hp 50ltr Low Noise Oil-Free Direct Drive Compressor, a wheel kit (two solid wheels and front rubber feet), an angled pull handle, a 1.3-metre fitted mains cable with 230V/13A plug, and two air filters.
A. In-stock orders placed before 14:30 Monday to Friday are usually dispatched the same day.,
By sharing your email, you agree to our privacy policy & terms of service