
Save Extra With 1 Offer
A. The Lucas LSLC55-12 is a 12V battery with a rated capacity of 55Ah (C20). It is designed for deep cycle mobility and standby applications rather than engine cranking.
A. The LSLC55-12 is fitted with F8 terminals, uses Polarity 1 (positive terminal on the right when viewed from the front), and has a B00 hold-down configuration. Verify that your equipment's terminal layout and tray dimensions are compatible before fitting.
A. The Lucas LSLC55-12 cross-references to YPC55-12H. If your equipment manual or existing battery references this part number, the LSLC55-12 is the corresponding Lucas equivalent, subject to dimensional and terminal verification.
A. The AGM technology used in the LSLC55-12 is capable of supporting start-stop applications. However, suitability must be verified against the product label prior to fitment, as application compatibility can vary. The battery is primarily intended for cyclic mobility and standby use.
A. The LSLC55-12 is purpose-built for deep cycle mobility and standby applications including powered wheelchairs, electric mobility scooters, passenger lifts, and hoists. It is not classified as a cranking battery and should not be selected as a primary engine-start battery.
A. The LSLC55-12 is supplied with a 1-year manufacturer's warranty covering defects in materials and workmanship under normal operating conditions. Refer to the warranty documentation supplied with the product for full terms.
A. Yes. The Lucas Supreme cyclic range includes multiple capacity options: LSLC22-12, LSLC26-12, LSLC34-12, LSLC42-12, and LSLC50-12 in standard AGM, as well as gel variants LSLC22-12G, LSLC26-12G, and LSLC34-12G. These are listed on the PartsForMachines website and can be selected to match your equipment's specified capacity requirement.
A. The LSLC55-12 is dispatched as a standard parcel. Standard delivery is 1–3 working days within UK mainland. A 30-day returns policy applies. For full delivery and returns terms, please refer to the PartsForMachines website.
A. The battery measures 229mm (length) × 138mm (width) × 214mm (height including terminal). It weighs 17.5kg. Please confirm that your battery compartment accommodates these dimensions before ordering.
A. The LSLC55-12 uses VRLA AGM (Valve Regulated Lead Acid, Absorbed Glass Mat) technology. The electrolyte is immobilised within glass mat separators, making the battery sealed, maintenance-free, and resistant to vibration — all properties that are important in mobility scooters, powered wheelchairs, and lifting equipment subjected to regular movement and repeated discharge cycles.
By sharing your email, you agree to our privacy policy & terms of service