Cart
POPULAR CATEGORY
ADD TO CART
| SERVICE | DELIVERY PRICE | DELIVERY TIME |
|---|---|---|
| Standard Delivery | £19.95 | 7 to 10 working days |
| SERVICE | DELIVERY PRICE | DELIVERY TIME |
|---|---|---|
| Standard Delivery | £19.95 | 7 to 10 working days |
| SERVICE | DELIVERY PRICE | DELIVERY TIME |
|---|---|---|
| Standard Delivery | £7.99 | 3 to 5 working days |
| SERVICE | DELIVERY PRICE | DELIVERY TIME |
|---|---|---|
| Standard Delivery | £7.99 | 5 to 7 working days |
| SERVICE | DELIVERY PRICE | DELIVERY TIME |
|---|---|---|
| Standard Delivery | £7.99 | 7 to 10 working days |
Product Number: LSLA3.2-12
Variations
Small-format standby and mobility applications demand a battery that combines reliable deep-cycle performance with minimal footprint and long shelf stability. The Lucas LSLA3.2-12 is a 12V 3.2Ah AGM standby battery engineered for UPS systems, alarm panels, emergency lighting, powered wheelchairs, mobility scooters, and similar low-drain cyclic or float applications where consistent, maintenance-free power is essential. Manufactured under the Lucas Supreme range by Lucas Automotive, this battery employs Absorbent Glass Mat (AGM) technology, in which the electrolyte is fully suspended within a fibreglass mat separator. This construction eliminates free acid, permits operation in any orientation, and delivers a low self-discharge rate – critical for standby duties where the battery may remain on float charge for extended periods. The sealed, valve-regulated design requires no topping up and resists vibration-induced degradation over its service life. The LSLA3.2-12 measures 134mm (L) × 67mm (W) × 64mm (H inc. terminal) and weighs 1.32 kg. It is fitted with flat TAB terminals, carries a B00 hold-down classification, and has a polarity code of 3. Compatible cross-references include NP2.8-12 and NP3.2-12. Verify suitability with the product label before fitting to any start-stop application. This battery is available across the Lucas Supreme LSLA standby range in multiple voltages and capacities, including LSLA1.2-12, LSLA4-6, LSLA5-12, LSLA7-12, LSLA9-12, LSLA10-12, LSLA12-6, LSLA12-12, LSLA14-12, and LSLA20-12, enabling selection of the correct unit for the specific energy requirements of the application. The Lucas LSLA3.2-12 is supplied with a 1-year warranty covering manufacturing defects and confirmed capacity failure under normal operating conditions. Standard delivery: 1–3 working days within UK mainland. 30-day returns. The Lucas range of standby VRLA AGM batteries delivers reliable power for low-voltage applications including alarms, emergency lighting, UPS systems and small electrical equipment. These quality manufactured batteries provide dependable, maintenance-free power across long float-charge periods.
Key Feature:Engineered for standby and mobility equipment, providing reliable power delivery, voltage stability, and long-term durability.
Uses:PartsForMachines is a premier e-commerce platform, founded in 2019 in Warwickshire, UK, specialising in aftermarket parts and services for construction, agriculture, and industrial machinery. We offer an extensive catalogue of over 500,000 products. Standard delivery: 1–3 working days within UK mainland. We are proud to be an authorised distributor, giving customers extra confidence when purchasing genuine products from us. In addition, we provide a 30-day return policy for eligible items.
| Brand | Lucas Automotive |
|---|---|
| Voltage | 12V |
| Capacity AH (C20) | 3.2Ah |
| Cold Cranking Amps (EN) | |
| L × W × H | 134mm × 67mm × 64mm |
| Warranty period | 1 Year |
| Weight (Kg) | 1.32 |
| Capacity AH (C5) | |
| Capacity AH (C10) | |
| Capacity AH (C100) | |
| Marine Cranking Amps (MCA) | |
| Watt-Hours (WH) | |
| Length (mm) | 134 |
| Width (mm) | 67 |
| Height Inc. Terminal (mm) | 64 |
| Terminal Placement | 3 |
| Terminal Type | TAB |
| Hold Down | B00 |
| Case Size | |
| ETN Number | |
| TTNR |
| Engine Parts | Product Number | Product Name | Recommended Units | Product Price |
|---|
Expert Guidelines for Preserving Your Heavy Equipment Battery Heavy machinery, including forklifts, bulldozers, and excavators, relies on robust batteries to minimize downtime and maximize operational availability. These batteries must endure even more challenging conditions than typical automotive batteries. Moreover,...
Standard Delivery: £7.99
Delivery Estimate: 3 to 5 working days
Save Extra With 1 Offer
Compare With Similar Items
Compare with Similar products
|
|||||
| Technical Specification | |||||
|---|---|---|---|---|---|
| PRODUCT NUMBER | S4000 | S4001 | S4018 | S4019 | S4020 |
| Voltage | 12 | 12 | 12 | 12 | 12 |
| Capacity (AH) | 44 | 44 | 40 | 40 | 45 |
| Cold Cranking Amps (EN1) | 420 | 440 | 330 | 330 | 330 |
| Terminal Type | 1 | 1 | 3 | 3 | 3 |
| Length | 175 | 207 | 187 | 187 | 238 |
| Width | 175 | 175 | 127 | 127 | 129 |
| Height | 190 | 175 | 227 | 227 | 227 |
| Show More | |||||
A. The Lucas LSLA3.2-12 is a 12-volt battery with a rated capacity of 3.2Ah at the C20 discharge rate, making it suitable for low-drain standby and cyclic mobility applications.
A. The battery measures 134mm in length, 67mm in width, and 64mm in height including the terminal. It weighs 1.32 kg.
A. The LSLA3.2-12 is fitted with flat TAB terminals. The polarity code is 3 and the hold-down classification is B00. Please verify terminal orientation against your application's wiring before installation.
A. The LSLA3.2-12 is a direct cross-reference for the NP2.8-12 and NP3.2-12. Always confirm that dimensions, terminal type, and capacity meet your equipment's original specification before fitting.
A. The AGM technology used in the LSLA3.2-12 is capable of supporting start-stop functionality. However, suitability for a specific start-stop application must be verified against the product label, as not all variants within this range are approved for every application type.
A. Yes. The sealed AGM construction means there is no free electrolyte, so the battery can be operated in any orientation without risk of leakage, provided the safety valve remains unobstructed.
A. The LSLA3.2-12 is supplied with a 1-year manufacturer's warranty covering confirmed manufacturing defects and capacity failure under normal operating and charging conditions. The warranty does not cover damage resulting from incorrect installation, overcharging, or physical misuse.
A. The LSLA3.2-12 is dispatched via standard parcel service. Standard delivery is 1–3 working days within UK mainland. A 30-day returns policy applies.
A. This battery is designed for standby and mobility applications including UPS systems, security alarm panels, emergency lighting units, powered wheelchairs, electric mobility scooters, lifts, and hoists — any application requiring a compact, sealed AGM battery on float or shallow-cycle duty.
A. The LSLA3.2-12 uses Absorbent Glass Mat (AGM) technology, in which the electrolyte is immobilised within a fibreglass separator. This results in a sealed, valve-regulated, maintenance-free construction with low self-discharge — well suited to float-charge standby duties such as UPS systems, alarm panels, and emergency lighting.
By sharing your email, you agree to our privacy policy & terms of service
Question about this product? Click here
