Cart
POPULAR CATEGORY
ADD TO CART
| SERVICE | DELIVERY PRICE | DELIVERY TIME |
|---|---|---|
| Standard Delivery | £9.95 | 7 to 10 working days |
| SERVICE | DELIVERY PRICE | DELIVERY TIME |
|---|---|---|
| Standard Delivery | £9.95 | 7 to 10 working days |
| SERVICE | DELIVERY PRICE | DELIVERY TIME |
|---|---|---|
| Standard Delivery | £3.99 | 3 to 5 working days |
| SERVICE | DELIVERY PRICE | DELIVERY TIME |
|---|---|---|
| Standard Delivery | £9.95 | 5 to 7 working days |
| SERVICE | DELIVERY PRICE | DELIVERY TIME |
|---|---|---|
| Standard Delivery | £9.95 | 7 to 10 working days |
Product Number: 2015MFB18-60
Balancing vibration isolation with structural support, this 20x15mm Male Flat Buffer with M6x18 stud (SKU 2015MFB18-60) occupies the practical middle ground of the range, suited to compact and moderately loaded installations where neither extreme softness nor high rigidity is required. At 60 Shore A, it delivers a max load capacity of 51.5 kg with a controlled deflection of 3.75 mm, making it well matched to applications that demand both adequate energy absorption and repeatable positional stability. The rubber-to-metal bonded construction provides the foundation for consistent performance under combined shear and compression loading. Its flat buffer geometry enables easy fitment directly against a surface or secondary component, absorbing and dissipating impact energy without specialist tooling or complex installation. The single M6x18 male stud threads directly into the receiving structure, keeping installation clean and straightforward. At 20 mm diameter and 15 mm height, this is among the more compact configurations in the Male Flat Buffer family, making it well suited to space-constrained assemblies in industrial machinery, agricultural equipment, construction equipment, commercial vehicles, and elevators. The 60 Shore A medium hardness offers a measured response across this application breadth, providing meaningful deflection under lighter to moderate dynamic inputs while retaining sufficient stiffness to support the mating component positionally. This grade is particularly effective where general-purpose buffering is needed across variable operating conditions rather than dedicated isolation or high-load restraint.
Flat buffers are an economical and simple solution to absorbing shock and vibration. They are used mainly in compression and are available with various configurations. Additional sizes, rubber compounds and stainless-steel metals are all available on request.
Typical applications include:PartsForMachines is a premier e-commerce platform, founded in 2019 in Warwickshire, UK, specializing in aftermarket parts and services for construction, agriculture, and industrial machinery. We offer an extensive catalog of over 500,000 products. Standard delivery: 1–3 working days within UK mainland. We are proud to be an authorised distributor, giving customers extra confidence when purchasing genuine products from us. In addition, we provide a 30-day return policy for eligible items.
| Rubber Mount Dimension (D) | 20mm |
|---|---|
| Height (H) | 15mm |
| Thread Size (V) | M6 |
| Bolt Length (I) | 18mm |
| Max Load (Kg) | 51.5 |
| Deflection (mm) | 3.75 |
| Engine Parts | Product Number | Product Name | Recommended Units | Product Price |
|---|
Standard Delivery: £3.99
Delivery Estimate: 3 to 5 working days
Save Extra With 1 Offer
Compare With Similar Items
Compare with Similar products
|
|||||
| Technical Specification | |||||
|---|---|---|---|---|---|
| PRODUCT NUMBER | 3030MFB20-45 | 2020MFB18-70 | 3030FFB08-45 | 3040MFB20-45 | 2020FFB06-70 |
| Type | Flat Buffer | Flat Buffer | Flat Buffer | Flat Buffer | Flat Buffer |
| Length | 30mm | 20mm | 30mm | 40mm | 20mm |
| Size | 30x30mm | 20x20mm | 30x30mm | 30x40mm | 20x20mm |
| Deflection | 7.5 | 5 | 7.5 | 10 | 5 |
| Diameter | 30mm | 20mm | 30mm | 30mm | 20mm |
| Diameter Range | 26-50mm | 11-25mm | 26-50mm | 26-50mm | 11-25mm |
| Length Range | 26-50mm | 11-25mm | 26-50mm | 26-50mm | 11-25mm |
| Shore Hardness | 45 | 70 | 45 | 45 | 70 |
| Thread | M8 | M6 | M8 | M8 | M6 |
| Show More | |||||
A. The buffer has a diameter of 20 mm and a height of 15 mm, with an M6x18 male stud. It has a maximum load capacity of 51.5 kg and a deflection of 3.75 mm.
A. This buffer is 60 Shore A, which is a medium hardness grade. It provides a balance between vibration isolation and load-bearing support — offering controlled deflection under moderate dynamic inputs while retaining sufficient stiffness to positionally support the mating component. Softer grades give greater deflection at lower load; harder grades carry higher load with less movement.
A. The Male Flat Buffer 2015MFB18-60 is suited to industrial machinery, agricultural equipment, construction equipment, commercial vehicles, and elevators. Industries served include construction and off-highway, agriculture, power generation, marine, railway and mass transit, automotive, and military and defence.
A. Male Flat buffers absorb and dissipate energy from impact shocks generated by external moving components. They can reduce impact force from a secondary object or act as an elastic element in direct contact with a surface, protecting surrounding structures, improving machinery lifespan, and enhancing operator comfort.
A. The single M6x18 male stud threads directly into the receiving structure, allowing straightforward installation without specialist tooling. The flat buffer face sits directly against the mating surface or secondary component.
A. Yes. The 20x15mm M6x18 Male Flat Buffer is also available as a softer 45 Shore A variant (2015MFB18-45), offering greater deflection and better isolation at lower loads, and as a firmer 70 Shore A variant (2015MFB18-70) for higher-load or reduced-movement applications.
A. Yes. Stainless steel metalwork and oil-resistant or high-temperature rubbers are available on request, along with additional and custom sizes.
A. We accept returns within 30 days of purchase for items that are unused, undamaged, and in their original packaging. Returns are available only for UK-delivered orders and must include proof of purchase. Before returning an item, please contact us at [email protected] to obtain a Return Merchandise Number (RMN).
A. In-stock orders placed before 14:30 Monday to Friday are usually dispatched the same day.
A. In-stock orders placed before 14:30 Monday to Friday are usually dispatched the same day.
By sharing your email, you agree to our privacy policy & terms of service
Question about this product? Click here
