Search
Search

Oops! We didn’t find any matching result

Main Menu
Phone Phone 01926754100 Cart Cart
Fit guarantee icon
FIT GUARANTEE or Hassle-Free Returns
Quick delivery icon
QUICK DELIVERY On All Products Across UK
Customer support icon
GREAT SUPPORT 24/7 Support For Any Query
rating icon
TOP RATED Trusted by Our Customers

Shop by Sub Category

Brands

FAQs

Shank diameter first, because the chisel has to fit. Then stroke and blows per minute: a long stroke hits harder and slower, a short stroke faster and lighter. The 1/2 inch 12.7mm shank runs through the B-series here.

A tool that delivers rapid impact into a seized fixing so the shock breaks the joint rather than the fastener. It works differently from a plain chisel hammer, and the Sykes Pickavant 90206000 and heavy duty 90245000 are the two bodies held.

They grade the hammer against the rivet being set, running 1X through 7X on the CP428x series, with the number rising as the rivet gets larger. Once the shank matches, the type number is the selection.

Only one made for the same shank. The shank diameter is the fitment and it is stated on both the hammer and the chisel, so the two are checked against each other rather than assumed to be standard.

A chisel hammer drives an interchangeable chisel into the work. A chipping hammer carries its own point for breaking scale and hard deposit off a surface. Both are on this leaf and the listing names which is which.

Chisel and hammer insert variants are listed for the vibro impact bodies, and replacement hammer sets are held for the tools that take them. The tool it fits is named on each listing.

Clear

Air Hammer

FilterFilters
View as Grid List

Shank diameter is the fitment. A chisel will only enter a hammer built for its shank, and the 1/2 inch 12.7mm size runs through the Chicago Pneumatic B-series here. Once the shank matches, stroke length and blows per minute decide the character of the tool: a long stroke hits harder and slower, which suits breaking a joint, and a short stroke hits faster and lighter, which suits dressing and cutting.

The vibro impact family works on a different principle from a plain chisel hammer. Instead of driving a chisel into the work, it delivers rapid impact into a seized fixing so that the shock breaks the joint rather than the fastener. Sykes Pickavant hold this ground with the 90206000 and the heavy duty 90245000, both taking chisel and hammer insert variants.

Rivet hammers are graded by type rather than by dimension. The Chicago Pneumatic CP428x series runs 1X through 7X, the number rising with the rivet being set, and the type is the whole selection once the shank is right. A chipping hammer and an impact driver for corroded screws sit alongside for the jobs a chisel will not do. Type is read off the old hammer or off the rivet itself rather than measured, and a hammer bought a size out will either fail to set the rivet or deform its head.

Blows per minute and stroke are stated per tool so the two can be read together, and replacement hammer sets are held for the tools that take them. For an unmarked hammer or an older tool, a photo over WhatsApp on 07754288583 identifies the shank and the insert it takes. The PCL APT517 sits alongside the CP and Sykes bodies, and the Sealey SA120 chipping hammer covers scale removal that a chisel would gouge.

Show Only My Country Products
In this feature, you can view only your country products.
Showing 1 to 2 of 2 entries
FAQs

Shank diameter first, because the chisel has to fit. Then stroke and blows per minute: a long stroke hits harder and slower, a short stroke faster and lighter. The 1/2 inch 12.7mm shank runs through the B-series here.

A tool that delivers rapid impact into a seized fixing so the shock breaks the joint rather than the fastener. It works differently from a plain chisel hammer, and the Sykes Pickavant 90206000 and heavy duty 90245000 are the two bodies held.

They grade the hammer against the rivet being set, running 1X through 7X on the CP428x series, with the number rising as the rivet gets larger. Once the shank matches, the type number is the selection.

Only one made for the same shank. The shank diameter is the fitment and it is stated on both the hammer and the chisel, so the two are checked against each other rather than assumed to be standard.

A chisel hammer drives an interchangeable chisel into the work. A chipping hammer carries its own point for breaking scale and hard deposit off a surface. Both are on this leaf and the listing names which is which.

Chisel and hammer insert variants are listed for the vibro impact bodies, and replacement hammer sets are held for the tools that take them. The tool it fits is named on each listing.

Get exclusive updates on offers & latest trends in construction industry

By sharing your email, you agree to our privacy policy & terms of service