Platform Trolley Rated 300kg? Load, Rough Ground, Lift and Brakes

A trolley that feels overloaded, small wheels that dig into gravel, or a heavy box that still has to be lifted onto the bench: most platform trolley trouble comes from a truck that does not suit the load, the ground or the height. Here is how to match all three.

PartsForMachines lists 37 products in its platform trolleys range, from Sealey, Draper, Clarke and SIP: flat-deck and folding trolleys, tyred trucks with sides, hydraulic platform trucks, pallet trucks, and a few beam trolleys and clamps.

Will a 300kg Platform Trolley Really Carry 300kg?

Yes, but treat the rating as a ceiling, not a target. On an uneven floor, not every wheel touches the ground at once, so three wheels can end up taking the whole load. Castor makers allow for this when sizing wheels, so leave some headroom yourself.

Match the deck to the load as well. The CST992 300kg platform truck has a 605 x 910mm deck on 125mm wheels, and the 04692 carries the same 300kg on a 900 x 600mm deck. For lighter loads, the CST991 takes 150kg on a 465 x 725mm deck.

Cobbles, Gravel or Grass: Will a Flat Dolly Do, or Do I Need Air Tyres?

A flat dolly is best kept to smooth floors; for cobbles, gravel or grass, look at a truck on large pneumatic tyres instead. The CM150 dolly, for example, rolls on 75mm castors made for the workshop floor.

Outdoors, the CST997 pneumatic-tyred platform truck runs on 250 x 90mm steel-centred pneumatic tyres which, the maker says, allow transport over the toughest terrain. It carries 200kg, and its mesh sides drop down for loading or lift off to leave a flatbed. For one heavy item, the CST986HD sack truck has 250mm solid PU tyres that never need pumping up.

How Do I Get a Heavy Load Up to Bench Height Without Lifting It?

Use a hydraulic platform truck: you raise the deck with a foot pedal, then slide the load across instead of lifting it. The pedal sits at the back, leaving both hands free, and a release on the handlebar lowers the deck smoothly and under control.

Choose by weight and height range. The HPT150 takes 150kg from 225 to 700mm, and the HPT300 hydraulic platform truck takes 300kg from 270 to 770mm on a 520 x 820mm deck. The HPT500 lifts 500kg up to 860mm. Measure your bench height first.

Can I Leave a Loaded Trolley Parked, and What Stops It Rolling?

Yes, once the brakes or locking castors are on. The CST773 platform truck with braked castors pairs two fixed wheels with two braked castors, so its 1200 x 800mm deck can be held steady while you load and unload it. The HPT300’s locking castors likewise hold it firmly when stationary.

A pallet truck left unattended on a slope or an uneven floor is a hazard. A pallet truck stop such as the 21136 is a non-slip rubber chock with a slot that captures its two main wheels.

What Should I Check Before I Order?

• your heaviest load against the rating, with headroom to spare
• the deck size against the load’s footprint, and sides or mesh if it could slide or topple
• the ground: castors for smooth floors, pneumatic tyres for yards, gravel and grass
• the height: a floor-level deck, or a hydraulic platform with the right minimum and maximum heights
• storage and parking: a folding or detachable handle, and braked or locking castors

Browse the platform trolleys range, or contact the PartsForMachines team by WhatsApp, telephone or email with the load and the ground you need to cross.

Product options, delivery options and returns terms are shown on each product page. A 30-day return policy applies to eligible items.

Frequently Asked Questions

Folding or fixed handle: does it matter?

It matters when space is tight, because a folding or detachable handle lets the truck store flat. The CST991 folding platform truck folds its handles flat, the CST993’s handle detaches completely, and the 04692’s handle folds away.

Can I join small dollies into a bigger platform?

Yes, with interlocking dollies. CM150 dollies link lengthways or sideways to make the platform size you need, then stack up to ten high when not in use. Each one is rated at 150kg and has non-slip pads to steady the load.

Sack truck or platform trolley for one heavy item?

It depends on the load’s footprint. A sack truck carries on a small toe plate, only 180mm deep on the 250kg CST986HD, so it suits one tall, compact item; bulky loads or several boxes need a platform’s deck.

How can I avoid marking a finished floor?

Look for non-marking wheels and protective edges. The PT2200 pallet truck runs on non-marking polyurethane wheels, the 04692 trolley has rubber protective edges, and the CST992 has a rubberised bumper strip to protect nearby surfaces.

How does a hydraulic platform come back down safely?

Smoothly and under control, using the safety release on the handlebar. On the HPT150, safety bars also prevent inadvertent lowering. The HPT150, HPT300 and HPT500 each come with a non-slip platform cover to help keep the load in place.

How do I stop a load sliding off?

Use a grippy deck and sides. The CST992 has a rubberised deck and the 04692 has heavy-duty matting, while mesh sides, as on the CST773, keep a load contained.

Pallet truck or platform truck for pallets?

A pallet truck: its forks slide under the pallet and lift it just clear of the floor. The PT2200 handles 2200kg with 1150mm forks and lifts from 85 to 200mm; the PT1170H high-lift truck raises 1000kg to 800mm, high enough for loading vans.

Can a hydraulic platform truck double as a workbench?

Yes. The HPT300 and HPT500 can serve as a mobile service bench, and the HPT150 may be used as one too. Raise the deck to a comfortable working height and set the two locking castors so the truck stays in place.

Is there a platform truck for EV batteries?

Yes. The EVBT700 is a high-lift hydraulic platform truck built to help remove and refit electric vehicle batteries, raising and lowering them under control. The EVBT1000 and EVBT1200 are higher-capacity versions of the same idea.